Reasons why Pokémon GPS does not Work On Realme V30?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Realme V30 device to restart. In most cases restarting the Realme V30 device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Realme V30 device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

How to use Pokemon Go Joystick on Realme V30?

Pokemon Go is one of the most popular augmented reality location-based games that let us catch Pokemons and complete tons of other tasks. Needless to say, there are times when players are not able to go outside to catch Pokemons due to all kinds of reasons. The good news is that you can still play your favorite game using a Pokemon Go joystick. To help you, I will let you know how to fake GPS in Pokemon Go using 3 reliable methods in this post.

Part 1: What’s the Need for a Pokemon Go Joystick?

If you are an avid Pokemon Go player, then you might already know that the game demands us to step outside to catch Pokemons or participate in raids. Sadly, not everyone can travel so much on their own. Therefore, you might consider using a Pokemon Go joystick on iOS/Android under the following circumstances.

• In the current Covid-19 pandemic, you might be under a lockdown and can’t step out.
• You could have already explored your nearby areas and would like to catch more Pokemons.
• There could be any other health or environmental condition, stopping you from going out.
• The weather outside might not be suitable or safe to explore the Pokemon Go map on your own.
• Any other possible reason for not being able to travel solely or having enough time to catch Pokemons.

Part 2: Possible Risks for Using a Pokemon Go Joystick

A Pokemon Go spoofing iOS/Android solution can easily change your present location in the game or even simulate your movement. Though, if you use the Pokemon Go joystick app multiple times a day and Niantic detects it, then it can cause some issues.

Please note that the use of any location spoofing or Pokemon Go hack (joystick) is against the terms of Niantic. Therefore, if your account is found using these hacks, then Niantic can display warning messages. If after getting multiple warnings, the hack is still being detected, then it can lead to a temporary or even a permanent ban of your account.

Part 3: How to Fake GPS in Pokemon Go: 3 Foolproof Solutions

Out of all the Pokemon Go joystick and location spoofing solutions, I would recommend trying the following tools.

3.1 Pokemon Go Joystick for iOS (No Jailbreak Needed)

If you are looking for a Pokemon Go spoofing iOS solution, then just give Dr. Fone - Virtual Location (iOS) a try. Without the need for jailbreaking your device, you can spoof your iPhone’s location to anywhere you like. The application can also be used to simulate its movement between multiple spots at a preferred speed.

Besides that, you can also mark any location as favorite or even import/export GPX files using Dr.Fone – Virtual Location. Since the application is extremely easy to use, you don’t have to go through any technical hassle to implement this Pokemon Go joystick iOS solution.

Step 1: Connect your iPhone and launch the application

Firstly, you can just connect your iOS device to the computer and launch Dr.Fone – Virtual Location application. You can agree to its terms of services and click on the “Get Started” button now.

Step 2: Spoof your iPhone Location to Anywhere you want

Once your iPhone is connected, its present location would automatically be displayed on the screen. To spoof the Pokemon Go location on iOS, select the “Teleport Mode” option and enter the target location’s address/name/coordinates on the search bar.

Afterward, you can select the target location and the interface would automatically load it. You can now move the pin around and even zoom in/out the map to get the desired spot. Lastly, click on the “Move Here” button to spoof the fake GPS on Pokemon Go.

Step 3: Simulate the iPhone Movement with a joystick

To use the Pokemon Go joystick iOS solution, you can select the One-stop or Multi-stop mode from the top. Now, you can drop the pins on the map as per your requirements to set up a route to cover.

Afterward, you can enter the number of times you want to cover the route and even set up a preferred speed. Lastly, click on the “March” button to start the simulation on the map. You can also use a joystick at the bottom to move around realistically on Pokemon Go.

Video Guide: Teleport to anywhere in the world!

3.2 Use a Pokemon Go Joystick APK for Android Devices

Just like iPhone, Android device owners can also implement these Pokemon Go hacks for location spoofing. From all the available options, you can consider using GPS Joystick by App Ninjas. As the name suggests, the app will enable a GPS joystick that you can use to simulate the movement of your device. It will let you fake GPS on Pokemon Go by entering the target coordinates or its address.

Step 1: Install the Pokemon Go Spoofer APK

To start with, you can just go to the Play Store page of the GPS Joystick app and install it on your device. Later, you can enable the Developer Options on the phone by going to its Settings > About Phone and tapping the “Build Number” field 7 times.

Afterward, go to its Settings > Developer Options and set the Pokemon Go spoofer APK the default mock location app.

Step 2: Set up the preferences to fake GPS on Pokemon Go

Great! Now all you need to do is launch the GPS Joystick app and go to its Settings to spoof your location. Here, you can enter the exact coordinates of the target location to spoof.

Besides that, you can also tap on the map option to directly enter the address or the name of the target location.

You can further visit the GPS Joystick settings to set up preferred walking, jogging, or running speeds for the simulated movement.

Step 3: Start simulating the movement on your Android

That’s it! Now, you can just view the GPS Joystick on the map with relevant options. You can start/stop the simulation as per your requirements and even directly enter the coordinates to fake GPS on Pokemon Go.

3.3 Pokemon Go Joystick Hack for Rooted Android Phones

Lastly, if you have a rooted Android device, then you can also explore tons of options to fake GPS on Pokemon Go. One of them FGL Pro, which is mostly used by experts for location spoofing and movement simulation. Since the Pokemon Go APK download is available for free, you can use the app without any issue. Here’s how you can use this Pokemon Go APK for rooted devices.

Step 1: Install the Pokemon Go Spoofer APK

At first, make sure that your Realme V30 is rooted before you install this Pokemon Go APK hack. Later, you can go to its website or any third-party installer to get the location spoofer app.

You can now launch the application and go to its Settings to enable the Root Mode. Also, make it the default mock location app by visiting the Developer Option on your phone.

Step 2: Start Simulating the movement of your Realme V30

Great! Now, you can just launch the FGL Pro app on your phone and tap on the search icon to look for the target location. You can now adjust the location on the map and tap on the Start icon. There will be a GPS joystick location on the map that would let you simulate your movement accordingly on the map.

Part 4: Tips to Avoid your Pokemon Go Account from Getting Banned

If you want to avoid getting your account banned and still use a reliable spoofing app for Pokemon Go, then consider the following tips:

• Try not to overly use the Pokemon Go joystick app all the time. It is recommended to use these apps 2-3 times a day only.

• Always consider the cooldown duration in mind before changing your location. For instance, avoid using the app for a while before moving from one place to another. If you move from London to Tokyo to New York the same day, then your account might get flagged.

• Try to spoof your location in the same district or state first and wait for a few hours before changing your whereabouts. The following cooldown duration chart would help you determine this in advance.

  

• Make sure that the Pokemon Go joystick you are using is a reliable solution (like the ones listed above).

• If you have already got a warning on your Pokemon Go account, then consider creating another account for using any fake GPS Pokemon Go hack instead.

There you go! By now, you would be able to implement these spoofing Pokemon Go tips and tricks. As you can see, there can be so many Pokemon Go spoofing iOS/Android solutions that you can explore. While there are plenty of Pokemon Go spoofer APK tools for Android devices, iOS users can try Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking your device, it will let you spoof its location and even simulate its movement to catch Pokemons remotely.

How to get the dragon scale and evolution-enabled pokemon On Realme V30?

The Dragon Scale is a special item in Pokémon Go that is used to evolve Seadra into Kingdra. To get a Dragon Scale in the game, you need to complete the 7-day Research Breakthrough. This means that you need to complete a Field Research task every day for 7 days to get the Dragon Scale. Once you have the Dragon Scale, you can use it to evolve Seadra into Kingdra.

Dragon scales in Pokémon GO are extremely exceptional and are utterly crucial in evolving pokemon. Pokemon go dragon scale evolutions can be as easy as utilizing the necessary amount of candy, but frequently scarce evolutions will call for an evolution object. These are usable that not only let you fill in your Pokedex but also gain access to many impactful beasts. There are several different ways to get a Dragon Scale, but none of them is guaranteed. This implies that you will have to accomplish as many of these tasks that are feasible – peculiarly because you can make use of them only once. Perhaps the simplest way of gaining a Dragon Scale is spinning Pokestops wherever likely. Each Pokestop comes up with a 1% probability of an evolution object, encompassing a Dragon Scale.

Following are the additional evolution items observed in Pokémon Go:

• King’s Rock
• Metal Coat
• Sinnoh Stone
• Sun Stone
• Unova Stone
• Upgrade

Part 1：What Pokémon can I evolve with a dragon scale on Pokémon Go?

The pokemon go dragon scale is one of the new evolution objects that can be employed in association with Pokemon Candy to evolve some of the generation 1 Pokemon to new generation 2 evolutions. The dragon scale is extremely strong and rigid. We can only make use of our Dragon Scale on a specific Pokemon. Dragon scale pokemon go evolutions contain the alteration of Seadra into Kingdra by combining the dragon scale along with 100 Horsea candies - making Kingdra a sturdy pocket monster ideal for raids and taking charge over the gyms.

Once receiving a Dragon Scale, a player can only use it to evolve Seadra. Any other Pokemon will not evolve with it or even need it to evolve.

Part 2：Fast way to get the exclusive Pokémon?

You can make use of the artificial locality of Dr. Fone to imitate your position without any motion and acquire exclusive Pokémon. The duplicate point of Dr. Fone lets you phony your orientation and permits your mobile application to presume that you are chosen in the app interface of Dr. Fone without being banned from the game or getting detected by the developers of Pokemon Go. To seize the pokemon, you can trail the instructions below with one click without having to go anywhere else.

Step 1: Replicating Position Fluke:

Pokemon Go can be played without requiring movement, using Dr. Fone’s toolkit. To replicate the position and guarantee that the iOS gadget is associated with the application, open the Virtual Location property using a functioning lightning cable.

You can click the ‘Get Started’ button to initiate the action as soon as your phone gets detected.

Step 2: Mirroring Motion amid steps:

Unfold the top right area of the initial option before reaching Dr. Fone’s GUI, which permits you to imitate maneuver amid the two spots. Pick the positioning pin and click on the ‘transfer here’ button in the search bar.

To begin the replication, you will be required to make a movement and traverse the ‘March’ button to reach it multiple times. By default, the action is set to one but can be outweighed by the user, and the plan will change correspondingly.

The change location will act as genuine for the Pokémon Go application, and it will presume that the player is moving in between the two points you chose on the Dr. Fone GUI screen. At the foot of the screen, the rate of motion can also be modified, making use of the gliding menu. By following these steps, you can use the fake motion of the position of Dr. Virtual Fone without needing to understand it, and your app will not be banned.

Step 3: Movement Simulation between more than two spots:

Dr. Fone’s application also lets you fake your motion joining more than two positions. The attribute is called after the multi-stop path that can be highlighted from the GUI toolbox class situated at the top-right position, which allows you to release several accurate endpoints on the map, and your position will take action correspondingly as managed by the virtual position application of Dr. Fone.

To let the system duplicate flow by choosing the accurate choices, press the ‘March’ button. You will have to do the Pokémon Go walking trick at some point. Dr. Fone’s virtual motion replicator application makes your life a lot easier and lets you do the job without having to worry about travel charges.

Part 3: How to get the dragon scale on Pokémon Go?

Pokemon go dragon scale can be obtained by taking charge of Gyms and spinning, waiting for the Pokestops to give you free dragon scales, but the chances are extremely low. PokeStops are symbolized by little blue box images on the map and usually can be observed in places of recreation such as a train station, a landmark, or even a regional post office. When your avatar is near to entering a PokeStop, the blue box image changes into a disc shape. The next thing you need to do is tap the disc, and it will exhibit a picture of the landmark, which is a chance to get a few free products.

You can get your hands on a dragon scale by spinning a specific Pokestop seven days in a row to get the required streak bonus. This won’t ensure you a dragon scale; however, it will give you the possibility of achieving other evolutionary objects such as the Sun Stone, Upgrade, Sinnoh Stone, Unova Stone, Metal Coat, and King’s Rock.

Conclusion

Specific Pokémon in Pokémon GO now call for rare evolution items such as a steel coat, a sunstone, a king’s rock, a dragon scale, or an upgrade to evolve, all of which are unplanned drops from Pokestops. However, the players can make use of Dr.Fone - Virtual Location application to gain version exclusive Pokemon and evolution items and make advancements in the game.

Also read: