Reasons why Pokémon GPS does not Work On Poco C55?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Poco C55 device to restart. In most cases restarting the Poco C55 device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Poco C55 device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

Additional Tips About Sinnoh Stone For Poco C55

Sinnoh Stones are similar to other evolutionary items found in Pokemon Go, like Metal Coat, Dragon Scale, and Sun Stones. Pokemon Go’s Sinnoh Stone is a rare evolution item enabling you to upgrade existing creatures into Gen 4 versions. It is extremely exciting to see your favorite Pokemon’s being upgraded, also making the best Pokemons of the game more powerful. The Pokemon Go Sinnoh Stone evolution list is also provided in the guide, which contains 18 Sinnoh Stone Evolutions.

Part 1: Understanding the idea of Pokemon Go Sinnoh Stone

The Sinnoh Stone is a new evolution item, and all eighteen-4th generation Pokémon’s require Sinnoh Stones for their evolution. It also allows Gen 1 and 2 Pokémon’s to evolve into Gen 4 evolution stages. The Sinnoh Stones items are used for all cross-generation evolutions. Below is the listing of Pokémon’s, which evolve using a Sinnoh Stone.

Part 2: Obtaining Sinnoh Stones to Level Up

Sinnoh Stone can be obtained during the battle against the three leaders on Community Day, on the completion of the final day of your 7-day Research Task, and During PVP. You won’t be finding them at Poke Stops. Main places where you can find Sinnoh Stones are on the 7th Day of your Research Task and award for taking part in PVP. Another place that is not popular but odds to find Sinnoh Stone is present includes the introduction to PVP when you’re new to it. Players can obtain up to 10 Sinnoh Stones during the February Community Day and when the month is Pokemon Go Community Day. 5 Sinnoh Stones can be obtained by beating the three leaders in the battles and another 5 from winning PVP battles against friends. Defeating a Team Go Rocket Leader and Go Battle Reward is Sinnoh Stone.

You can use Dr. Fone’s Virtual Location to mock your location without any movement and obtain these Sinnoh Stones. Dr.Fone’s virtual location allows you to mock your location and lets the application on your phone think that you’re at a place selected in Dr.Fone’s application interface without resulting in any ban or detection from Pokemon Go developers. You can follow the steps listed below in order to catch Pokemon by one click to go anywhere without moving.

Step 1: Mocking Location Quirk:

Pokemon Go can be played by using the toolkit of Dr. Fone without shifting. Open the Virtual Location feature using a functioning lightning cable to mock the location and ensure that the iOS device is linked to the application.

You can press the Get Started” button to start the process upon phone detection.

Step 2: Imitating Movement between steps:

Open the first choice located in the top-right corner until you enter Dr.Fone’s GUI, which helps you to fake movement between the two locations. Select the location pin found in the search bar and press the “Move Here” button.

You want to make a motion, and navigate to the “March” button to start the simulation, enter the magnitude of times. By default, the movement is set to one, but the user can override it, and the application will move accordingly.

For the Pokemon Go application, the new position will appear as real and will presume that you are walking between the two selected locations you have selected on the Dr. Fone screen. The walking pace can also be changed at the bottom of the screen using the sliding menu. This way, without knowing it, you can use the fake movement of the desired position, and your application will not be prohibited.

Step 3: Movement Simulation between more than two spots:

The application by Dr.Fone also helps you to mock movement between more than two spots. The function is named after the multi-stop route that can be selected from the toolbox category gui found at the top-right corner, which lets you drop different unique stops located on the map, and your location will behave accordingly as handled by Dr.Fone’s virtual location application.

Click the ‘March’ button to allow the system to simulate motion by selecting the correct options. You’ll have to do the Pokémon Go walking trick at some point. The virtual motion simulation software for Dr. Fone makes your life easier and helps you to do the job without thinking about travel costs.

Part 3: Essential Requirement and Evolving Pokémon’s Using Sinnoh Stone

Only the trainers above the 10th Level have access to acquire Sinnoh Stone. The Sinnoh Stone can be obtained from Training Battles and Training with Team Leaders. You also need 100 candies for each of the Pokemon. Once you have got your hands on Sinnoh Stones and now you want to know where they should be used, there’s numerous 4th generation Pokémon who require Sinnoh Stone for their upgrade. Mamoswine is one of the best if you’re prioritizing attackers for a raid because it has a mix of extremely high CP with the strong ground and ice-type moves.

Conclusion

Sinnoh Stone, a rare evolution item, is one of the Perks of Pokemon Go letting you evolve your favorite Pokemon and keep them throughout your journey in the game. Dr.Fone’s virtual application lets you find them with ease without any real movement on your part and helps you enjoy the game to the fullest.

3 Ways for Android Pokemon Go Spoofing On Poco C55

Pokemon Go is one of the most popular gaming apps of the present times, which is based on augmented reality. Developed by Niantic for iOS and Android, this single console game lets us catch all sorts of Pokemons in different areas. Though, to catch Pokemons, users are expected to visit different places and step out. Needless to say, it restricts the scope to catch Pokemons , and users often look for Pokemon Go spoofing apps for Android. This would let you change your location and spoof Pokemon Go on Android pretty easily.

In this guide, I will teach you how to use reliable Android Pokemon Go spoof apps and the risks related to them.

Part 1: Why so many people seek Pokemon Go spoofing on Android?

Before we discuss various Android Pokemon Go spoof solutions, it is important to cover the basics. As you know, Pokemon Go is based on augmented reality and encourages us to move around to catch more Pokemons. To do this, users go out, visit parks, cafes, and tons of different places. Though, there would come a time when you would exhaust all the nearby Pokemons.

If you want to have more Pokemons in your collection or visit different gyms, then you need to do Pokemon Go GPS spoof on Android. This will make the app believe that you are somewhere else and would unlock more Pokemons for you. Needless to say, you can spoof Pokemon Go at the convenience of your home and would not have to travel to different places to extend your collection.

Part 2: Must-know Risks for Android Pokemon Go Spoofing in 2020

A while back, Niantic realized that a lot of people are misusing the app by exploiting Android’s features to change their location. To control the Pokemon Go spoofing on Android, Niantic has come up with the three-strike policy.

• If the company would detect that you are using a Pokemon Go spoofer for Android, then it will give you the first strike (shadowban). You would still be able to play the game but won’t sight a rare Pokemon for the next 7 days.
• The next strike is pretty dangerous (temp ban), as it would block your account for a month. After almost 30 days, you can restore your account.
• The third (and the last strike) would permanently block your account. Though, if you think your account has been suspended by mistake, then you can appeal Niantic to revoke your account.

Part 3: 3 Best Methods for Android Pokemon Go Spoofing

As you can see, if you are using any unreliable Pokemon Go spoofing app on Android, then it can even get your account suspended. Not just that, it can also harm your device and make it vulnerable to security threats. To help you pick the best spoofing app for Pokemon Go Android, we have handpicked the 3 most secure options here. Let’s explore these Pokemon Go spoofing solutions for Android in 2019.

3.1 Use a VPN

A Virtual Private Network is still considered as the safest bet to spoof Pokemon Go on Android. Firstly, it will hide your original IP address while changing your location so that you can access other Pokemons. Since most of the VPNs would encrypt your data, it will also minimize your risks of getting blocked by Pokemon Go. Apart from changing your location, it will also let you play Pokemon Go if the gaming app is not available in your region.

Some of the Virtual Private Networks that I have tried are Express VPN, Nord VPN, and IP Vanish. Most of these VPNs work similarly and have user-friendly Android applications. You can select from the available servers to spoof your location and protect your IP address at the same time. Here’s how you can use a VPN to do Pokemon Go spoofing on Android.

Step 1. Install Pokemon Go on your Poco C55 and create your account if you haven’t already. Also, install a secure VPN like IP Vanish and have an active account. Most of the VPNs provide a free trial period as well.

Step 2. Close the Pokemon Go app from running in the background so that it can’t detect the presence of a VPN. Now, launch a VPN app and go to the list of the servers that it provides. From here, just select the appropriate location (country or city) where Pokemon Go is already active.

Step 3. Once the VPN has started working, it will automatically spoof your location. Now, launch Pokemon Go on the Poco C55 device again and access the new location.

3.2 Use Fake GPS Go

If you have an Android device, you can use tons of fake GPS apps to spoof your location on Pokemon Go. Most of these apps would not even need root access on the Poco C55 device. You can just unlock the Developer Options on your Poco C55 and enable the mock location feature from it. Fake GPS Go is a freely available application that will let you pin your location to any desired place. This will let you spoof Pokemon Go on Android pretty easily without getting detected.

Step 1. Firstly, go to your phone’s Settings > System > About Phone and tap on the “Build Number” option seven consecutive times. This will unlock the Developer Options on your phone.

Step 2. Now, install and launch the Fake GPS Go app on your device and grant it the needed access. Later, go to the Poco C55 device’s Settings > Developer Options and turn it on. From the Mock Location App feature, select Fake GPS Go and give it the access to change your device’s location.

Step 3. That’s it! Once Fake GPS Go has the needed access, you can just launch the application and manually change your location. Afterward, launch Pokemon Go to access your new location.

If you want, you can even close Fake GPS Go so that Pokemon Go won’t detect its presence. Don’t worry – it will keep running in the background until you would manually launch it and stop the location spoof feature.

3.3 Use Fake GPS Free

This is another fake GPS app that is available for free and can easily be used on your Android. The app is pretty lightweight and won’t access a lot of device usage as well. Even though the app has released a new version lately, some users have complained of getting a Niantic strike by using it. Therefore, you can use this Pokemon Go spoofing app Android at your own risk.

Step 1. Firstly, go to your device’s settings and unlock the Developer Options by tapping on the Build Number 7 times. Also, go to Play Store and download Fake GPS Free on your device.

Step 2. Once the app is installed, go to Settings > Developer Options and tap on the mock location app feature to grant Fake GPS free the needed access.

Step 3. Afterward, launch the Fake GPS Free application on your device and look for any desired location. You can also manually zoom in or out the map to mark your new location.

Step 4. Once the location is spoofed, you will get the relevant notification. Close the GPS app now and launch Pokemon Go instead to access the new location on the gaming app.

The final words

There you go! After following this guide, you would be able to spoof Pokemon Go on Android in three different ways. For your convenience, we have also included the risks of using any Pokemon Go spoofer for Android as well. As you can see, a VPN would be your best spoofing app for Pokemon Go Android due to its added security features. Though, you can also use Fake GPS Go app to do Pokemon Go spoofing on Android. Go ahead and give these solutions a try and feel free to share your tips about Pokemon Go spoofing in the comments as well!