Reasons why Pokémon GPS does not Work On Realme Narzo N53?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Realme Narzo N53 device to restart. In most cases restarting the Realme Narzo N53 device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Realme Narzo N53 device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

Which Pokémon can Evolve with a Moon Stone For Realme Narzo N53?

Evolution items play a significant role in evolving certain species in the Pokémon game. Moon Stone is one of these peculiar items that are worth adding to your Pokedex. However, getting Moon Stone Pokémon is a tough assignment and you have to pull your best bells and whistles. However, there are several hacks and tricks that can reduce your hunting pain. In this article, we shall take you through a complete guide on Moon Stone Pokémon and evolutions.

Part 1. Moon Stone Pokémon

What is Moon Stone Pokémon?

Moon Stone is an evolution stone introduced in generation I. This peculiar stone is used to evolve certain species of Pokémon. In terms of appearance, Moon Stone Pokémon is elliptical and black as the night sky.

The simplest way to get a Moon Stone in Pokémon Sword and Shield is to go to Lake of Outrage in the Wild area. You will see a body of water on your left and a watt trader standing near it. To cross this water body, you will have to unlock the Rotom Bike from Route 9. When you manage this, check under the eight stones and you might be lucky that one of them might yield a Moon Stone. Also, you can navigate to the Dusty Bowl in the Wild Area. Here, you will find barren stones between a grassy rock and wheat field.

Pokémon that Evolve with a Moon Stone

Moon Stone makes certain species of Pokémon evolve. To evolve a Pokémon using Moon Stone in Pokémon Sword and Shield, simply open the bag and go to the “Other Items” section. Finally, use Moon Stone in any of the following Pokémon.

1. Nidorina

Nidorina is a poison type Pokémon that was introduced in Generation I. it looks like a rabbit with blue skin and dark spots around the body. Its natural abilities are poison point, rivalry, and hustle. As of level 16, Nidorona evolved from Nidoran. With the use of Moon Stone, Nidorina can evolve into Nidoqueen.

2. Nidorino

Nidorino is a male counterpart of Nidorina. This poison-type Pokémon debuted in Generation I and looks like a rabbit. It has a red-purple color with some dark spots spread across the body. Sharp teeth protrude with large upper jaws and spikes. This Pokémon is quick to anger. Nidorino evolved from Nidoran as of level 16 and can evolve to Nidoking using the Moon Stone.

3. Clefairy

This is a fairy-type Pokémon that was introduced in Generation I. It is a small, round, and star-shaped Pokémon whose abilities include magic guard and cute charm. It is timid and rarely feature near humans. Clefairy evolves from Cleffa when it gets leveled up with high friendship. With the help of Moon Stone, Clefairy evolves into Clefable.

4. Jigglypuff

This is a normal/fairy type of Pokémon that was also introduced in Generation I. Before Generation VI, this Pokémon was entirely a normal-type Pokémon. Jigglypuff itself is an evolution of Igglybuff and can evolve into Wigglytuff with the help of Moon Stone.

5. Skitty

This is a normal type Pokémon that was introduced in Generation II. This Pokémon is pink and looks like a cat with a cute charm ability. Skitty can evolve to Delcatty using the Moon Stone.

6. Munna

Munna is a psychic-type Pokémon that was introduced in Generation V. It is a small Pokémon with a pink round body having purple flower painting on its back. With the use of Moon Stone, Munna evolves into a Musharna.

Part 2. Tricks and Hacks to Get Moon Stone Pokémon

As you have seen above, getting a Moon Stone is not an easy ride. It involves lots of trials and there is no guarantee to get it. But what tricks and hacks can you incorporate to make your hunt seamless? The following are some of the plausible tricks that you can use to easily grab a Moon Stone and add it to your Pokedex.

1. Use Dr. Fone Virtual iOS Location

It goes without question that Dr. Fone Virtual Location is the best location spoofer tool. Remember Pokémon game is location-based and if you can play around with your location then you are at an upper hand of grabbing a rare Pokémon or an evolution item like Moon Stone. Dr. Fone Virtual Location makes it seamless to teleport to any location across the globe while you are seated comfortably at home. Besides, you can simulate movements between two or more points and make GPS control more flexible with the help of a joystick.

How to Teleport with Dr. Fone Virtual Location

Step 1. After installing Dr. Fone Virtual Location, launch it, and select “Virtual Location.” Now connect your iPhone to the computer.

Step 2. Click the “Get Started” on the subsequent page to access the teleport options.

Step 3. The program will display a new page with three icons at the top-right. Click the third icon to take you to the teleport mode. Again enter the place you want to teleport to in the text field at the top-left of this same window and then hit “Go.”

Step 4. Click “Move Here” from the pop-up that follows to teleport to the location you provided.

2. Use Android Spoofing Tool- Pgsharp

Pgsharp is a fake GPS location tool for Android devices and is suitable for playing Pokémon from a fake location with no root. It allows users to teleport in real-time while they are just sited at home. It has a downloadable free version. It has a user-friendly interface, and once you have set the fake GPS location on your Realme Narzo N53, you can catch rare Pokémon and evolution items with ease.

3. Use Go-tcha Evolve

Go-tcha Evolve is an application that allows you to set animations and vibration to alert you in the case of Pokémon or pokestops. You can use its “auto-catch” feature to allow it automatically grab the Pokémon or pokestops without having to respond to alerts.

What Pokémon Evolve with A Dawn Stone For Realme Narzo N53?

If you are a diehard Pokémon Go player, you probably know how exciting it is when your Pokémon evolves. Evolutions mean a boost in stats and strength in raids. Plenty of Pokémon users are conversant with the traditional raiding as a way to evolve. However, you can use special items to evolve your Pokémon. One such item is the dawn stone. In this article, we are going to take you through a detailed guide on dawn stone evolutions and how to get it with ease.

Part 1. Dawn Stone Pokémon Evolutions

What is Dawn Stone in Pokémon Sword and Shield?

Like Shiny Stone, dusk stone, Sun Stone, and Moon Stone, Dawn Stone is another peculiar evolution item in Pokémon Sword and Shield. If you combine Dawn Stone with certain Pokémon, they will evolve to another level. This peculiar stone was introduced in Generation IV, and in terms of appearance, Dawn Stone sparkles like a glittering eye.

You can get dawn stone from the Digging Duo found near the Wild Area nursery. You will, however, be required to pay them 500 watts before digging random items for you. Remember, this is a trial and error thing, and you might have to spend a lot of watts before finding a dawn stone. Also, you can get any evolutionary stone, including the Dawn Stone in the Lake of Outrage. Here, you will have to first obtain a Rotom Bike on route 9 to move across the water.

Pokémon that Evolve with Dawn Stone

As aforementioned, dawn stone is an evolution item that is used to evolve certain species of Pokémon. To evolve your Pokémon using Dawn Stone in Pokémon Sword and Shield, enter the bag menu and choose the “Other Items” tab. Hover on the Dawn Stone and select the “Use this item” option. Finally, select the Pokémon to evolve. These Pokémon that can be evolved using dawn stone include:

1. Kirlia

Kirlia is a small humanoid Pokémon whose upper body and arms are white while the waist and legs are light green. This makes it appear as though it is wearing tights. Kirlia’s natural abilities include synchronization and trace. It loves dancing on sunny mornings and becomes more beautiful when they sense e positive emotions of trainers. A vast majority of Kirlia live in the cities, although some are still found in the forest. Kirlia evolved from Ralts and has two possible evolutions, namely Gardevoir and Gallade. If it reaches level 30, it evolves to Gardevoir. However, if it is male and given a dawn stone, it will evolve to Gallade.

2. Snorunt

Snorunt is an ice-type Pokémon that was introduced in Generation III. It is also referred to as the “Snow Hat Pokémon.” You can find Snorunt in seafoam café, snow canyon, or even in Mysterious Grotto. Furthermore, you can obtain it by trading or Pokémon Roulette. Snorunt can evolve into Glalie or Froslass. If it reaches level 42, Snorunt evolves to Glalie. For Snorunt to evolve into Froslass, it requires a dawn stone. However, the Snorunt must be a female to evolve to Froslass.

Click here

Part 2. Hacks and Tricks to get Dawn Stone Pokémon

It is every player’s wish to avoid the long hunt for a Dawn Stone into their Podex. This issue has given birth to some of the hacks and tricks to help players cross territory and find the intended evolution item or Pokémon. Some of these tricks include:

1. Use iOS spoofing tool- Dr. Fone Virtual Location

Dr. Fone Virtual Location is an amazing iOS spoofer tool that allows users to fake their actual location. This makes it a good tool for location-based games like Pokémon Go. With Dr. Fone Virtual Location, you can teleport to whichever place across the globe by a click of a button. If you want to simulate movements to confuse the game app, you can simulate two or multiple points. Furthermore, you can leverage the joystick to improve the flexibility of GPS control. To teleport to any place in the world with Dr. Fone Virtual Location’s help, follow the steps below.

Step 1. Download Dr. Fone Virtual Location and install it on your computer. Once installed, launch it and then select the “Virtual Location” tab on the primary window. Also, connect your iOS device to the computer.

Step 2. On the next page, click the “Get Started” button to proceed.

Step 3. You should see three icons on the top-right of the subsequent page. Click the third icon to switch to the teleport mode. At the top-left, enter the location of the place you want to teleport to and click “Go.”

Step 4. When the program has found the location, a dialog box will appear in the background. Click “Move Here” to teleport to this location.

2. Use Pokémon Gotcha

Pokémon Go-tcha makes hunting Pokémon and evolution items much easier. With this tool, you can go for a hunt without looking at your smartphone. When you run Go-tcha Evolve on the Pokémon Go application, you can set color animations and vibrations to alert you about Pokémon and pokestops that are in range. Moreover, you can use the auto-catch feature so that you don’t have to respond to alerts. You can also check on time, your stats, and leverage the new pedometer feature to count your steps. This program comes with various exciting colors for you to choose from and a bunch of other great features.

3. Use iTools

iTools location spoofer is another good GPS mocking tool that is suitable for Pokémon Go games. By faking the GPS location, you can easily access territories where rare Pokémon or evolution items are available while seated at home or in the office. This program supports iOS 12 devices or earlier versions. However, there are scores of people who have complained about several crashes. Nevertheless, you can try it if you have got some penny to spare.

Also read: