Reasons why Pokémon GPS does not Work On Honor Magic 5 Pro?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Honor Magic 5 Pro device to restart. In most cases restarting the Honor Magic 5 Pro device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Honor Magic 5 Pro device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

How and Where to Find a Shiny Stone Pokémon For Honor Magic 5 Pro?

Shiny Stone Pokémon is an important evolution item in Pokémon Sword and Shield. If you are a Pokémon player, you understand how great it is to capture a Shiny Stone. However, the Shiny Stone is a rare item, and you will have to put more work to grab one. In this article, we will to explain to you everything you ought to know about Shiny Stone Pokémon, including how to get them with less effort. Let’s get started.

Part 1. Shiny Stone Pokémon

What is Shiny Stone Evolution?

A Shiny Stone is an item in Pokémon Go that is used to evolve certain Pokémon. Shiny Stone was introduced in Generation IV and is no different from other evolution stones such as dusk stones, dawn stone, and ice stone, to mention but a few. The major differences could be their location as well as the type of Pokémon they help to evolve. You can identify this peculiar stone by its dazzling, shining light.

How and where to find a Shiny Stone evolution

In Pokémon Sword and Shield, the easiest way to get any evolution stone, including Shiny Stone, is by completing poke jobs. When you earn a water badge and then the gym badge, you can access the third tier poke jobs. Everything further will depend on whether your Pokémon perform great in their assigned jobs. If it performs great, you will be rewarded with an evolution stone that could be a Shiny Stone. If you want your Pokémon to do a great job, make sure you meticulously read through the summary of every given poke job. This is vital because it provides you a clue of what Pokémon you should pick.

Shiny Stone Evolution

In Pokémon Go, Shiny Stone is used to evolve certain Pokémon species. The following are some of the Pokémon that evolve using Shiny Stone. Evolving them is pretty simple. Just launch the menu and navigate to the bag. Select the “Other items” tab and use it to evolve any of the Pokémon listed below.

1. Roselia

Roselia is small, light green in color grass and poison type Pokémon. It has stats of 50 hp, 60 attacks, 65 speed, and 45 defense. This Pokémon was introduced in Generation III and had three thorns on its head and black eyes with long eyelashes. It holds a rose on the one hand and a red one on the other hand. Its aroma draws serenity, but the thorns on its head contain poison. The healthier it is, the stronger its aroma is. This Pokémon evolves from Budew through friendship level up in the day. When it is subjected to a Shiny Stone, it evolves into Roserade.

2. Minccino

This is a normal type of Pokémon that was introduced in Generation 5. It is also referred to as Chinchilla Pokémon. Its abilities include cute charm, technician, and skill link. Its stats are hp-55, attack-50, defence-40, speed-75, and total combat points-75. A Minccino evolves into a Cincino using a Shiny Stone. In Pokémon Sword and Shield, Minccino is located in rolling fields, East Lake Axewell, Route 5, and Giant’s cap.

3. Togetic

Togetic is a fairy and flying type of Pokémon that has ten hatch cycles. Its abilities include hustle, serene grace, and super luck. Togetic itself evolves from Togepi with leveled up friendship through camp play and cooking curry. It can float in midair without having to flip it wings. It appears and showers happiness to kindhearted and caring people. It, however, becomes dispirited if it encounters people who aren’t kind. Togetic is located in Stony Wilderness and from an evolving Togepi. Togetic evolves to Togekiss with the help of a Shiny Stone.

Part 2. Tricks and Hacks to Find Shiny Stone Pokémon

Finding a Shiny Stone in Pokémon Sword and Shield is challenging because it is a rare item. Nevertheless, some hacks and tricks can reduce your curve of finding a Shiny Stone, as explained below.

1. Use the iOS spoofing tool-Dr. Fone Virtual Location

Since the game of Pokémon is location-based, you can fake your GPS location by simply teleporting to an appropriate Shiny Stone location while you are seated at your home. This is achievable with the help of Dr. Fone Virtual Location . The program is powerful, simple, and easy to use. You can teleport to whatever place you want, simulate movements along a route set by two or multiple points. To teleport to the location where it is easier to grab a Shiny Stone using Dr. Fone Virtual Location, follow the steps below.

Step 1. Download and install Dr. Fone Virtual Location on your computer. Now run it and click on the “Virtual Location” tab.

Step 2. After that, connect your iOS to the PC and click the “Get Started” button.

Step 3. On the next page, click the third icon on the top-right to provide the teleport mode. Choose the location you want to teleport to within the filed at the top and press “Go.”

Step 4. Click “Move Here” on the dialog box that pops up once the program finds the location.

2. Use Android spoofing tool- Pgsharp

Pgsharp i8s an Android application that enables users to be fake their GPS location and fools location-based apps like Pokémon Go to enter a territory that is easy to grab a Shiny Stone or Pokémon. It has a joystick feature for easy and smooth movement, coordinates to move to specific locations, auto walkthrough several pokestops, and saves your last location, among others.

3. Use a Drone

Some YouTube channels teach you how to use drones to cheat in Pokémon Go. A good example of a drone is DJI PantomDrone. When this drone is integrated with some smart software, you can easily control a phone that is attached to the drone. This way, you can sit at home while visiting gyms and pokestops.

How to use iSpoofer on Honor Magic 5 Pro?

iSpoofer is a location spoofer that allows you to change your location on your device. This is useful for games like Pokemon Go, where you can catch Pokemons from different regions without leaving your home. However, iSpoofer is not available for download anymore. If you are looking for an alternative to iSpoofer, you can use Dr.Fone Virtual Location. Here’s how you can use Dr.Fone Virtual Location to spoof your location on your Honor Magic 5 Pro.

iSpoofer is one of the most useful tools for iOS users, that’s designed to simulate a user’s GPS location. With iSpoofer, you can change your current location to anywhere in the world and access geo-restricted content without any hassle. While the tool has several real-world applications, the majority of users use iSpoofer to fake their location to catch rare Pokemon in Pokemon Go.

Since iSpoofer is an extremely reliable app, even Android users want to know if they can use it on their smartphones or not. If you’re one of them, this guide will help. In today’s article, we are going to discuss if you can download iSpoofer for Android or not and what are some of the best solutions to fake GPS location on an Android device.

So, without any further ado, let’s get started.

• Part 1: Can I download the iSpoofer on Android
• Part 2: Common ways to spoof on Android

Part 1:  Can I download the iSpoofer on Android

Unfortunately, iSpoofer isn’t available for Android. It’s an exclusive geo spoofing app that only works on iOS devices. In fact, all its features are tailored for the iOS ecosystem only. So, if you have an Android device, you won’t be able to download iSpoofer for Android at all.

However, the good news is that you don’t need iSpoofer to fake GPS location on an Android smartphone. There are dozens of Android-specific location spoofing apps that’ll help you simulate the GPS location and play Pokemon Go with a fake location. Some of these tools also come with a dedicated GPS Joystick feature, which means you’ll also be able to control your movement while sitting at one spot.

Part 2:  Common ways to spoof on Android

When it comes to choosing the right location spoofing methods for Android, you’ll have to be extra cautious. Why? Because there are many fake GPS apps on Android that aren’t reliable and may damage your smartphone’s overall functionality as well.

Here are some of the most common ways to spoof location on Android devices.

1. Use VMOS

VMOS is an application that lets users set up a virtual machine on their Android device. This means that you’ll be able to set up two different Android systems on the same device. What makes VMOS the right tool for geo spoofing on Android is the fact that it offers a one-click root enable feature. You can easily root your virtual Android OS without damaging the firmware of the primary OS. This way you’ll be able to install professional location spoofing tools and change your GPS location without any hassle.

The only downside of using VMOS is that it’s extremely hard to set up and manage. First and foremost, you’ll need different tools to successfully set up the virtual OS on your device. Secondly, VMOS is heavy software and if your smartphone doesn’t have decent configurations, it may even slow down the overall processing.

2. Root Your Device

Another way to fake location on Android is to root your device. Rooting an Android device will allow you to install third-party spoofing apps that offer extensive functionality. However, when you’ll root your device, you won’t be able to claim its warranty anymore. So, in case you don’t want to void your smartphone’s warranty, ‘rooting’ may not be the right solution to fake your location in Pokemon Go.

3. Use PGSharp

PGSharp is one of the best alternatives to iSpoofer for Android. It’s a tweaked version of the original Pokemon Go app that comes with a few additional features such as spoofing and GPS Joystick. The best part about using PGSharp is that it’s compatible with all Android devices. You won’t have to root your device to install and run PGSharp.

You can either choose the free or the paid version of the app. Of course, the latter comes with a few additional features, but if you only want to fake location in Pokemon Go, the free version of PGSharp will get the job done as well.

Note: Keep in mind that PGSharp isn’t available on Google Play Store and you’ll have to download it from the official PGSharp website.

Extension: safest way to spoof on iOS- Dr.Fone virtual location

So, that’s how you can fake GPS location on an Android device and collect different types of Pokemon in Pokemon Go. Even though iSPoofer isn’t available for Android, you can still use the above three methods to mock location without any effort.

It’s also worth noting that iSpoofer is permanently shut down and you can no longer install it on iOS devices as well. Even the iSpoofer website is down and if you want to fake location on your iPhone/iPad, you’ll have to look for other options. One of the best ways to change GPS location on an iOS device is to use Dr.Fone - Virtual Location (iOS). It’s a professional geo spoofing tool for iOS that comes with a wide variety of features to mock location on Honor Magic 5 Pros.

It has a dedicated “Teleport Mode” that’ll allow you to change your current location to anywhere in the world. You can even set a fake location using its GPS coordinates. Like iSpoofer, Dr.Fone - Virtual Location (iOS) also comes with the GPS Joystick feature. This means you’ll be able to catch different types of Pokemon without moving at all.

Here are a few key features of Dr.Fone - Virtual Location (iOS).

• Change your current location with a single click
• Use GPS coordinates to find locations
• Virtually control your GPS movement using the Joystick feature
• Customize your movement speed while walking in different directions
• Compatible with all iOS versions

Follow these steps to change your GPS location on an iDevice using Dr.Fone - Virtual Location (iOS).

Step 1 - Install the Dr.Fone toolkit on your computer and launch the software. Click “Virtual Location” and connect your iPhone to the computer using a lightning cable.

Step 2 - Once the tool recognizes your device, click “Get Started” to proceed further.

Step 3 - You’ll be prompted to a map that’ll point to your current location. Select “Teleport Mode” from the top-right corner and use the search bar to find the desired location.

Step 4 - The pointer will move to the selected location automatically. Finally, click “Move Here” to set it as your new location.

That’s how you can change GPS location on an iPhone/iPad using Dr.Fone - Virtual Location (iOS).