How to use Pokemon Go Joystick on Realme 12+ 5G?

Pokemon Go is one of the most popular augmented reality location-based games that let us catch Pokemons and complete tons of other tasks. Needless to say, there are times when players are not able to go outside to catch Pokemons due to all kinds of reasons. The good news is that you can still play your favorite game using a Pokemon Go joystick. To help you, I will let you know how to fake GPS in Pokemon Go using 3 reliable methods in this post.

Part 1: What’s the Need for a Pokemon Go Joystick?

If you are an avid Pokemon Go player, then you might already know that the game demands us to step outside to catch Pokemons or participate in raids. Sadly, not everyone can travel so much on their own. Therefore, you might consider using a Pokemon Go joystick on iOS/Android under the following circumstances.

• In the current Covid-19 pandemic, you might be under a lockdown and can’t step out.
• You could have already explored your nearby areas and would like to catch more Pokemons.
• There could be any other health or environmental condition, stopping you from going out.
• The weather outside might not be suitable or safe to explore the Pokemon Go map on your own.
• Any other possible reason for not being able to travel solely or having enough time to catch Pokemons.

Part 2: Possible Risks for Using a Pokemon Go Joystick

A Pokemon Go spoofing iOS/Android solution can easily change your present location in the game or even simulate your movement. Though, if you use the Pokemon Go joystick app multiple times a day and Niantic detects it, then it can cause some issues.

Please note that the use of any location spoofing or Pokemon Go hack (joystick) is against the terms of Niantic. Therefore, if your account is found using these hacks, then Niantic can display warning messages. If after getting multiple warnings, the hack is still being detected, then it can lead to a temporary or even a permanent ban of your account.

Part 3: How to Fake GPS in Pokemon Go: 3 Foolproof Solutions

Out of all the Pokemon Go joystick and location spoofing solutions, I would recommend trying the following tools.

3.1 Pokemon Go Joystick for iOS (No Jailbreak Needed)

If you are looking for a Pokemon Go spoofing iOS solution, then just give Dr. Fone - Virtual Location (iOS) a try. Without the need for jailbreaking your device, you can spoof your iPhone’s location to anywhere you like. The application can also be used to simulate its movement between multiple spots at a preferred speed.

Besides that, you can also mark any location as favorite or even import/export GPX files using Dr.Fone – Virtual Location. Since the application is extremely easy to use, you don’t have to go through any technical hassle to implement this Pokemon Go joystick iOS solution.

Step 1: Connect your iPhone and launch the application

Firstly, you can just connect your iOS device to the computer and launch Dr.Fone – Virtual Location application. You can agree to its terms of services and click on the “Get Started” button now.

Step 2: Spoof your iPhone Location to Anywhere you want

Once your iPhone is connected, its present location would automatically be displayed on the screen. To spoof the Pokemon Go location on iOS, select the “Teleport Mode” option and enter the target location’s address/name/coordinates on the search bar.

Afterward, you can select the target location and the interface would automatically load it. You can now move the pin around and even zoom in/out the map to get the desired spot. Lastly, click on the “Move Here” button to spoof the fake GPS on Pokemon Go.

Step 3: Simulate the iPhone Movement with a joystick

To use the Pokemon Go joystick iOS solution, you can select the One-stop or Multi-stop mode from the top. Now, you can drop the pins on the map as per your requirements to set up a route to cover.

Afterward, you can enter the number of times you want to cover the route and even set up a preferred speed. Lastly, click on the “March” button to start the simulation on the map. You can also use a joystick at the bottom to move around realistically on Pokemon Go.

Video Guide: Teleport to anywhere in the world!

3.2 Use a Pokemon Go Joystick APK for Android Devices

Just like iPhone, Android device owners can also implement these Pokemon Go hacks for location spoofing. From all the available options, you can consider using GPS Joystick by App Ninjas. As the name suggests, the app will enable a GPS joystick that you can use to simulate the movement of your device. It will let you fake GPS on Pokemon Go by entering the target coordinates or its address.

Step 1: Install the Pokemon Go Spoofer APK

To start with, you can just go to the Play Store page of the GPS Joystick app and install it on your device. Later, you can enable the Developer Options on the phone by going to its Settings > About Phone and tapping the “Build Number” field 7 times.

Afterward, go to its Settings > Developer Options and set the Pokemon Go spoofer APK the default mock location app.

Step 2: Set up the preferences to fake GPS on Pokemon Go

Great! Now all you need to do is launch the GPS Joystick app and go to its Settings to spoof your location. Here, you can enter the exact coordinates of the target location to spoof.

Besides that, you can also tap on the map option to directly enter the address or the name of the target location.

You can further visit the GPS Joystick settings to set up preferred walking, jogging, or running speeds for the simulated movement.

Step 3: Start simulating the movement on your Android

That’s it! Now, you can just view the GPS Joystick on the map with relevant options. You can start/stop the simulation as per your requirements and even directly enter the coordinates to fake GPS on Pokemon Go.

3.3 Pokemon Go Joystick Hack for Rooted Android Phones

Lastly, if you have a rooted Android device, then you can also explore tons of options to fake GPS on Pokemon Go. One of them FGL Pro, which is mostly used by experts for location spoofing and movement simulation. Since the Pokemon Go APK download is available for free, you can use the app without any issue. Here’s how you can use this Pokemon Go APK for rooted devices.

Step 1: Install the Pokemon Go Spoofer APK

At first, make sure that your Realme 12+ 5G is rooted before you install this Pokemon Go APK hack. Later, you can go to its website or any third-party installer to get the location spoofer app.

You can now launch the application and go to its Settings to enable the Root Mode. Also, make it the default mock location app by visiting the Developer Option on your phone.

Step 2: Start Simulating the movement of your Realme 12+ 5G

Great! Now, you can just launch the FGL Pro app on your phone and tap on the search icon to look for the target location. You can now adjust the location on the map and tap on the Start icon. There will be a GPS joystick location on the map that would let you simulate your movement accordingly on the map.

Part 4: Tips to Avoid your Pokemon Go Account from Getting Banned

If you want to avoid getting your account banned and still use a reliable spoofing app for Pokemon Go, then consider the following tips:

• Try not to overly use the Pokemon Go joystick app all the time. It is recommended to use these apps 2-3 times a day only.

• Always consider the cooldown duration in mind before changing your location. For instance, avoid using the app for a while before moving from one place to another. If you move from London to Tokyo to New York the same day, then your account might get flagged.

• Try to spoof your location in the same district or state first and wait for a few hours before changing your whereabouts. The following cooldown duration chart would help you determine this in advance.

  

• Make sure that the Pokemon Go joystick you are using is a reliable solution (like the ones listed above).

• If you have already got a warning on your Pokemon Go account, then consider creating another account for using any fake GPS Pokemon Go hack instead.

There you go! By now, you would be able to implement these spoofing Pokemon Go tips and tricks. As you can see, there can be so many Pokemon Go spoofing iOS/Android solutions that you can explore. While there are plenty of Pokemon Go spoofer APK tools for Android devices, iOS users can try Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking your device, it will let you spoof its location and even simulate its movement to catch Pokemons remotely.

9 Mind-Blowing Tricks to Hatch Eggs in Pokemon Go Without Walking On Realme 12+ 5G

“I have been playing Pokemon Go for over a year now, but I always find it hard to hatch new eggs. It needs so much walking, and I can’t do that because of my work – as I don’t get too much time to go out. I know so many people who use location spoofers to do it. Can someone tell me how to hatch eggs in Pokemon Go without walking?”

If you are also going through a similar situation with Pokemon Go, then this would be a perfect guide for you. Ideally, to hatch an egg in Pokemon Go, users are supposed to walk a lot. Don’t worry – some smart tricks can help you hatch more eggs without walking. Read on and learn how to hatch eggs without walking in Pokemon Go!

 Click “Try It Free” to Download Dr.Fone and Hatch Eggs in Pokemon Go Without Walking Now!

Way 1: Use an iOS Location Spoofer

An iOS location spoofer is one of the best ways to learn Pokemon Go hatch eggs without walking. If you own an iOS device, then I would recommend using Dr.Fone - Virtual Location (iOS) , which provides excellent location spoofing solutions. With just one click, you can mock your location to anywhere else in the world. Furthermore, you can also simulate your movement between different spots.

• There is a dedicated feature to simulate our walking movement from one spot to another or between multiple spots using it.
• You can enter the number of times you wish to move to and from the specific locations on Dr.Fone – Virtual Location (iOS).
• There is also an option to select your speed – which can make you mock movements like walking, cycling, or driving.
• You can change your locations and movements as many times as you want without the need to jailbreak your device.

To learn how to hatch Pokemon Go eggs without walking using Dr.Fone – Virtual Location (iOS), the following steps can be taken.

Step 1: Connect your device and launch the app

Firstly, just connect your iPhone to the application and launch the Wondershare Dr.Fone > Virtual Location feature.

Just agree to the terms and click on the “Get Started” button to launch the interface of Virtual Location and start Pokemon Go how to hatch eggs at home.

Step 2: Walk between two stops

As the interface would be launched, you can see five different modes in the top-right corner. Just click on the third option (One-stop route) and look for any location from the search bar.

Now you can just select the number of times you wish to move and complete other settings, such as enabling the realistic and fluctuation mode. After that, click on the “Move Here” button.

Tips:
1. Realistic Mode: It enhances the realism of the simulation by fluctuating the speed during the simulation.
2. Fluctuation Mode: This feature enables you to move around within a 5-meter range after reaching your destination, instead of remaining static. This helps to make the GPS location change more realistic, making it less likely for Pokemon Go to detect the use of the virtual location.

This will just start the simulation, and you can even adjust the speed from a slider at the bottom.

Step 3: Move along multiple spots

Using Dr.Fone – Virtual Location (iOS), you can also simulate an entire route between multiple spots as well. To do this, just click on the “Multi-stop route” which is the fourth option in the top-right corner of the interface.

Now, you can mark multiple spots on the map and can also select the number of times you wish to take this route. Click on the “Start Moving” button to start Pokemon Go hatch eggs without walking.

In the end, your location would be changed as the simulation would make Pokemon Go believe that you are taking the subsequent route. You can also change your walking speed from a slider as well.

In this way, you can learn how to hatch eggs in Pokemon Go without walking at the convenience of your home!

Way 2: Use an Android Location Spoofer

This is one of the quickest ways to learn how to hatch Pokemon Go eggs without walking. If you own an Android device, then you can simply use a GPS spoofing app to manually change the location of your device. This will trick Pokemon Go into believing that you are walking instead. For iPhone users, the feature would need a jailbroken device though.

While changing your location, make sure that you do it tactfully. For instance, if an egg would need 10 kilometers of walking, then change your location gradually instead of just switching it in one go. Here’s how to hatch eggs in Pokemon Go without walking by using a GPS spoofer.

1. Firstly, unlock your Realme 12+ 5G and go to its Settings > About Phone to tap the Build Number field 7 times. This will unlock the Developer Options settings on your Android.

   

2. Now, go to the Play Store and install a reliable location spoofing app on your phone. Later, visit Settings > Developer Options and turn it on. Also, allow mock locations on the phone and choose the installed app from here.

   

3. That’s it! Now you can just launch the fake GPS app and manually change your location to a few meters away to trick Pokemon Go. Do the same a few times to cover a prominent distance.

   

Just be sure that Pokemon Go won’t detect that you are using a GPS spoofer to hatch eggs. The regular use of an app like this might result in your account ban.

Way 3: Fix Your Realme 12+ 5G on a Drone and Play Pokemon Go

Apart from a location spoofing app, there are a handful of other ways to learn how to hatch eggs without walking in Pokemon Go. Most of the eggs in Pokemon Go would need you to walk 2, 5, or 10 kilometers. The good news is that an average drone can easily cover this distance. Firstly, get a working drone on which you can easily place your phone. It is recommended to get a lock so that your device won’t fall while it is on a drone. Once your phone is successfully attached to a drone, just use it to cover a substantial distance. Make sure that the speed is minimal so that Pokemon Go would believe that you are walking instead.

Things to Remember

• While doing so, don’t forget about the safety of your phone as it can get stolen by someone if it goes too far.
• Use a lock and make sure that your phone won’t fall from your drone.
• Enable the Find My Realme 12+ 5G service on your Realme 12+ 5G or iPhone so that you can locate your phone if it is lost.
• Move your drone slowly so that Pokemon Go would not detect that you are using a drone or playing the game while driving.

Way 4: Exchange the Friend Code of Other Pokemon Go Users

A while back, Pokemon Go enabled the option to add friends on the app and send them gifts. Presently, we can send gifts to 20 other friends from our account in a day. Therefore, if you have a lot of friends, then you can send them eggs, including the exclusive 7 km egg. There are tons of online sources and forums for people to exchange their friend codes for Pokemon Go.

1. Firstly, Launch Pokemon Go on your phone and go to your profile. Adjacent to the “Me” section, tap on the “Friends” section instead.

   

2. Here, you can see a list of your friends and an option to add more friends on Pokemon Go. To add a friend, you need to enter their code which can be obtained from any dedicated forum or even Reddit.

3. That’s it! Once you have added a friend, go to their profile, and choose to trade or send them a gift. For instance, you can send them an exclusive egg and help them hack eggs without walking.

   

Pro-Tip

If you have a friend who goes for a jog or walks a lot, then you can just open Pokemon Go on their phone and let them cover the distance for you as well!

Way 5: Use Your Pokecoins to Purchase More Incubators

You might already know that Pokecoins is the official currency of Pokemon Go. Using it, you can buy all kinds of tools, incense, eggs, incubators, and even Pokemons. Though, if you wish to learn how to hack eggs in Pokemon Go without moving, then consider getting some incubators. There are all kinds of incubators available in the game that can help you hatch eggs without walking much.

1. Firstly, make sure that you have enough Pokecoins with you. If not, launch the app and tap on the Pokeball from its home to visit its shop.

2. From here, you can buy as many Pokecoins as you want. For instance, $0.99 would let you purchase 100 Pokecoins.

   

3. Great! Once you have enough Pokecoins, go to the Shop again and choose to buy eggs and incubators.

4. After getting enough incubators, you can go to your collection and apply more incubators to hatch eggs without walking.

   

Way 6: Make Use of Your Bike or Skateboard

This is one of the oldest tricks in the book to learn how to hatch eggs in Pokemon Go without walking. You can just place your phone carefully on your bike or skateboard and cover the needed distance to hatch more eggs. While you would still have to go out for this, the effort needed would be far less than walking.

Just make sure that you stay safe while riding your bike or skateboard. Don’t focus too much on catching new Pokemons. Instead, just cover the needed distance to hatch the egg. Also, ride your bike or skateboard slowly to make sure Pokemon Go won’t detect any fast movement.

Way 7: Use a Roomba while Playing Pokemon Go

If you have a Roomba or any other robotic cleaner in the house, then you can also take its assistance to hack Pokemon Go eggs. All you got to do is place your phone on the Roomba and let it move around in your house. Since the robotic cleaner would move slowly, it will make Pokemon Go believe that you are walking instead. Just be sure that your phone will stay safe and protected. I would recommend placing it in a waterproof lock to further protect it from any wear and tear.

Way 8: Create a Model Railroad to Play Pokemon Go

If you are already into model railroads, then you won’t face any issues playing Pokemon Go. It would be the replica of a big railroad with miniature trains. Simply place your phone on a miniature train and let it revolve around the railroad to cover the distance. Just keep your phone safe and regulate the speed of the train to make sure that Pokemon Go won’t detect any fast movement. You would have to drive your train for a while to cover the distance, but you don’t have to walk to do it.

Way 9: Use A Turntable to Hatch Eggs without Walking Pokemon Go

Do you have a turntable? If yes, you are lucky! You can use it that you used to listen to music to trick Pokemon Go that you’re walking and hatch the eggs. Because the turntable creates enough motion in a wide enough circle that it will trick your phone’s internal sensors into thinking you’re walking. This trick is for anyone who wants to be a quick hatch in Pokemon Go! Here are the steps:

Place your phone on the outermost edge of the turntable > Turn on the turntable > Confirm if your eggs are starting to hatch. If not, readjust your device and try again.

Tips: Tired of walking to hatch eggs? Using Dr.Fone - Virtual Location to hatch Pokémon Go eggs without taking a step. Explore the world of Pokémon from the comfort of your home. Try it now and level up your Pokémon Go adventure!

Bonus Tip: The Different Types of Pokemon Eggs in Pokemon Go

In Pokemon Go, there are several types of Pokemon Eggs that you can collect. These eggs can be obtained by visiting PokeStops or by receiving them as rewards for completing certain in-game tasks. Once an egg is collected, you must walk a certain distance (ranging from 2 to 12 kilometers) to hatch the egg and reveal the Pokemon inside. You can use the ways mentioned above to hatch eggs in Pokemon Go without walking.

The types of eggs that can be collected in Pokemon Go include:

1. 2 km eggs - These eggs typically hatch common Pokemon, such as Pidgey or Caterpie.
2. 5 km eggs - These eggs can hatch a range of Pokemon, including some starters like Charmander and Squirtle, as well as rarer species like Dratini.
3. 7 km eggs - These eggs usually contain baby Pokemon, like Pichu or Togepi, as well as some Alolan forms.
4. 10 km eggs - These eggs are the rarest and can hatch some of the strongest and most sought-after Pokémon, such as Snorlax, Lapras, and even certain legendary Pokemon like Moltres or Zapdos.

Conclusion

Now that you know how to hatch eggs in Pokemon Go without walking in 9 different ways, using a professional location spoofer(like Dr.Fone - Virtual Location ), you can easily be a Poke master for sure. Go ahead and try some of these expert tips and tricks to hatch Pokemon eggs. Just be sure that the app would not detect that you are cheating else it can ban your profile. Also, consider your safety as the first priority and even protect your phone while implementing these tips in a secure way. For more tips and tricks, you can visit the Wondershare Video Community .

Which Pokémon can Evolve with a Moon Stone For Realme 12+ 5G?

Evolution items play a significant role in evolving certain species in the Pokémon game. Moon Stone is one of these peculiar items that are worth adding to your Pokedex. However, getting Moon Stone Pokémon is a tough assignment and you have to pull your best bells and whistles. However, there are several hacks and tricks that can reduce your hunting pain. In this article, we shall take you through a complete guide on Moon Stone Pokémon and evolutions.

Part 1. Moon Stone Pokémon

What is Moon Stone Pokémon?

Moon Stone is an evolution stone introduced in generation I. This peculiar stone is used to evolve certain species of Pokémon. In terms of appearance, Moon Stone Pokémon is elliptical and black as the night sky.

The simplest way to get a Moon Stone in Pokémon Sword and Shield is to go to Lake of Outrage in the Wild area. You will see a body of water on your left and a watt trader standing near it. To cross this water body, you will have to unlock the Rotom Bike from Route 9. When you manage this, check under the eight stones and you might be lucky that one of them might yield a Moon Stone. Also, you can navigate to the Dusty Bowl in the Wild Area. Here, you will find barren stones between a grassy rock and wheat field.

Pokémon that Evolve with a Moon Stone

Moon Stone makes certain species of Pokémon evolve. To evolve a Pokémon using Moon Stone in Pokémon Sword and Shield, simply open the bag and go to the “Other Items” section. Finally, use Moon Stone in any of the following Pokémon.

1. Nidorina

Nidorina is a poison type Pokémon that was introduced in Generation I. it looks like a rabbit with blue skin and dark spots around the body. Its natural abilities are poison point, rivalry, and hustle. As of level 16, Nidorona evolved from Nidoran. With the use of Moon Stone, Nidorina can evolve into Nidoqueen.

2. Nidorino

Nidorino is a male counterpart of Nidorina. This poison-type Pokémon debuted in Generation I and looks like a rabbit. It has a red-purple color with some dark spots spread across the body. Sharp teeth protrude with large upper jaws and spikes. This Pokémon is quick to anger. Nidorino evolved from Nidoran as of level 16 and can evolve to Nidoking using the Moon Stone.

3. Clefairy

This is a fairy-type Pokémon that was introduced in Generation I. It is a small, round, and star-shaped Pokémon whose abilities include magic guard and cute charm. It is timid and rarely feature near humans. Clefairy evolves from Cleffa when it gets leveled up with high friendship. With the help of Moon Stone, Clefairy evolves into Clefable.

4. Jigglypuff

This is a normal/fairy type of Pokémon that was also introduced in Generation I. Before Generation VI, this Pokémon was entirely a normal-type Pokémon. Jigglypuff itself is an evolution of Igglybuff and can evolve into Wigglytuff with the help of Moon Stone.

5. Skitty

This is a normal type Pokémon that was introduced in Generation II. This Pokémon is pink and looks like a cat with a cute charm ability. Skitty can evolve to Delcatty using the Moon Stone.

6. Munna

Munna is a psychic-type Pokémon that was introduced in Generation V. It is a small Pokémon with a pink round body having purple flower painting on its back. With the use of Moon Stone, Munna evolves into a Musharna.

Part 2. Tricks and Hacks to Get Moon Stone Pokémon

As you have seen above, getting a Moon Stone is not an easy ride. It involves lots of trials and there is no guarantee to get it. But what tricks and hacks can you incorporate to make your hunt seamless? The following are some of the plausible tricks that you can use to easily grab a Moon Stone and add it to your Pokedex.

1. Use Dr. Fone Virtual iOS Location

It goes without question that Dr. Fone Virtual Location is the best location spoofer tool. Remember Pokémon game is location-based and if you can play around with your location then you are at an upper hand of grabbing a rare Pokémon or an evolution item like Moon Stone. Dr. Fone Virtual Location makes it seamless to teleport to any location across the globe while you are seated comfortably at home. Besides, you can simulate movements between two or more points and make GPS control more flexible with the help of a joystick.

How to Teleport with Dr. Fone Virtual Location

Step 1. After installing Dr. Fone Virtual Location, launch it, and select “Virtual Location.” Now connect your iPhone to the computer.

Step 2. Click the “Get Started” on the subsequent page to access the teleport options.

Step 3. The program will display a new page with three icons at the top-right. Click the third icon to take you to the teleport mode. Again enter the place you want to teleport to in the text field at the top-left of this same window and then hit “Go.”

Step 4. Click “Move Here” from the pop-up that follows to teleport to the location you provided.

2. Use Android Spoofing Tool- Pgsharp

Pgsharp is a fake GPS location tool for Android devices and is suitable for playing Pokémon from a fake location with no root. It allows users to teleport in real-time while they are just sited at home. It has a downloadable free version. It has a user-friendly interface, and once you have set the fake GPS location on your Realme 12+ 5G, you can catch rare Pokémon and evolution items with ease.

3. Use Go-tcha Evolve

Go-tcha Evolve is an application that allows you to set animations and vibration to alert you in the case of Pokémon or pokestops. You can use its “auto-catch” feature to allow it automatically grab the Pokémon or pokestops without having to respond to alerts.