How to use Pokemon Go Joystick on Honor Magic Vs 2?

Pokemon Go is one of the most popular augmented reality location-based games that let us catch Pokemons and complete tons of other tasks. Needless to say, there are times when players are not able to go outside to catch Pokemons due to all kinds of reasons. The good news is that you can still play your favorite game using a Pokemon Go joystick. To help you, I will let you know how to fake GPS in Pokemon Go using 3 reliable methods in this post.

Part 1: What’s the Need for a Pokemon Go Joystick?

If you are an avid Pokemon Go player, then you might already know that the game demands us to step outside to catch Pokemons or participate in raids. Sadly, not everyone can travel so much on their own. Therefore, you might consider using a Pokemon Go joystick on iOS/Android under the following circumstances.

• In the current Covid-19 pandemic, you might be under a lockdown and can’t step out.
• You could have already explored your nearby areas and would like to catch more Pokemons.
• There could be any other health or environmental condition, stopping you from going out.
• The weather outside might not be suitable or safe to explore the Pokemon Go map on your own.
• Any other possible reason for not being able to travel solely or having enough time to catch Pokemons.

Part 2: Possible Risks for Using a Pokemon Go Joystick

A Pokemon Go spoofing iOS/Android solution can easily change your present location in the game or even simulate your movement. Though, if you use the Pokemon Go joystick app multiple times a day and Niantic detects it, then it can cause some issues.

Please note that the use of any location spoofing or Pokemon Go hack (joystick) is against the terms of Niantic. Therefore, if your account is found using these hacks, then Niantic can display warning messages. If after getting multiple warnings, the hack is still being detected, then it can lead to a temporary or even a permanent ban of your account.

Part 3: How to Fake GPS in Pokemon Go: 3 Foolproof Solutions

Out of all the Pokemon Go joystick and location spoofing solutions, I would recommend trying the following tools.

3.1 Pokemon Go Joystick for iOS (No Jailbreak Needed)

If you are looking for a Pokemon Go spoofing iOS solution, then just give Dr. Fone - Virtual Location (iOS) a try. Without the need for jailbreaking your device, you can spoof your iPhone’s location to anywhere you like. The application can also be used to simulate its movement between multiple spots at a preferred speed.

Besides that, you can also mark any location as favorite or even import/export GPX files using Dr.Fone – Virtual Location. Since the application is extremely easy to use, you don’t have to go through any technical hassle to implement this Pokemon Go joystick iOS solution.

Step 1: Connect your iPhone and launch the application

Firstly, you can just connect your iOS device to the computer and launch Dr.Fone – Virtual Location application. You can agree to its terms of services and click on the “Get Started” button now.

Step 2: Spoof your iPhone Location to Anywhere you want

Once your iPhone is connected, its present location would automatically be displayed on the screen. To spoof the Pokemon Go location on iOS, select the “Teleport Mode” option and enter the target location’s address/name/coordinates on the search bar.

Afterward, you can select the target location and the interface would automatically load it. You can now move the pin around and even zoom in/out the map to get the desired spot. Lastly, click on the “Move Here” button to spoof the fake GPS on Pokemon Go.

Step 3: Simulate the iPhone Movement with a joystick

To use the Pokemon Go joystick iOS solution, you can select the One-stop or Multi-stop mode from the top. Now, you can drop the pins on the map as per your requirements to set up a route to cover.

Afterward, you can enter the number of times you want to cover the route and even set up a preferred speed. Lastly, click on the “March” button to start the simulation on the map. You can also use a joystick at the bottom to move around realistically on Pokemon Go.

Video Guide: Teleport to anywhere in the world!

3.2 Use a Pokemon Go Joystick APK for Android Devices

Just like iPhone, Android device owners can also implement these Pokemon Go hacks for location spoofing. From all the available options, you can consider using GPS Joystick by App Ninjas. As the name suggests, the app will enable a GPS joystick that you can use to simulate the movement of your device. It will let you fake GPS on Pokemon Go by entering the target coordinates or its address.

Step 1: Install the Pokemon Go Spoofer APK

To start with, you can just go to the Play Store page of the GPS Joystick app and install it on your device. Later, you can enable the Developer Options on the phone by going to its Settings > About Phone and tapping the “Build Number” field 7 times.

Afterward, go to its Settings > Developer Options and set the Pokemon Go spoofer APK the default mock location app.

Step 2: Set up the preferences to fake GPS on Pokemon Go

Great! Now all you need to do is launch the GPS Joystick app and go to its Settings to spoof your location. Here, you can enter the exact coordinates of the target location to spoof.

Besides that, you can also tap on the map option to directly enter the address or the name of the target location.

You can further visit the GPS Joystick settings to set up preferred walking, jogging, or running speeds for the simulated movement.

Step 3: Start simulating the movement on your Android

That’s it! Now, you can just view the GPS Joystick on the map with relevant options. You can start/stop the simulation as per your requirements and even directly enter the coordinates to fake GPS on Pokemon Go.

3.3 Pokemon Go Joystick Hack for Rooted Android Phones

Lastly, if you have a rooted Android device, then you can also explore tons of options to fake GPS on Pokemon Go. One of them FGL Pro, which is mostly used by experts for location spoofing and movement simulation. Since the Pokemon Go APK download is available for free, you can use the app without any issue. Here’s how you can use this Pokemon Go APK for rooted devices.

Step 1: Install the Pokemon Go Spoofer APK

At first, make sure that your Honor Magic Vs 2 is rooted before you install this Pokemon Go APK hack. Later, you can go to its website or any third-party installer to get the location spoofer app.

You can now launch the application and go to its Settings to enable the Root Mode. Also, make it the default mock location app by visiting the Developer Option on your phone.

Step 2: Start Simulating the movement of your Honor Magic Vs 2

Great! Now, you can just launch the FGL Pro app on your phone and tap on the search icon to look for the target location. You can now adjust the location on the map and tap on the Start icon. There will be a GPS joystick location on the map that would let you simulate your movement accordingly on the map.

Part 4: Tips to Avoid your Pokemon Go Account from Getting Banned

If you want to avoid getting your account banned and still use a reliable spoofing app for Pokemon Go, then consider the following tips:

• Try not to overly use the Pokemon Go joystick app all the time. It is recommended to use these apps 2-3 times a day only.

• Always consider the cooldown duration in mind before changing your location. For instance, avoid using the app for a while before moving from one place to another. If you move from London to Tokyo to New York the same day, then your account might get flagged.

• Try to spoof your location in the same district or state first and wait for a few hours before changing your whereabouts. The following cooldown duration chart would help you determine this in advance.

  

• Make sure that the Pokemon Go joystick you are using is a reliable solution (like the ones listed above).

• If you have already got a warning on your Pokemon Go account, then consider creating another account for using any fake GPS Pokemon Go hack instead.

There you go! By now, you would be able to implement these spoofing Pokemon Go tips and tricks. As you can see, there can be so many Pokemon Go spoofing iOS/Android solutions that you can explore. While there are plenty of Pokemon Go spoofer APK tools for Android devices, iOS users can try Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking your device, it will let you spoof its location and even simulate its movement to catch Pokemons remotely.

Catch or Beat Sleeping Snorlax on Pokemon Go For Honor Magic Vs 2

Embracing new challenges and seeking out rare creatures to add to their Pokédex consistently excites Pokémon GO players. The coveted reward for players globally, Snorlax, a legendary Pokémon, is widely recognized as the iconic Sleeping Snorlax. Despite being one of the original 151 Pokémon in Pokémon GO, capturing Snorlax remains exceptionally challenging. It falls under Z’s category of Pokémons, which also includes Komala and Abra.

This makes it a unique challenge for trainers seeking to add this heavyweight Pokémon to their collection. In this guide, we will go through the latest strategies and updates in the Pokémon GO universe. The aim is to reveal the secrets to catching a Pokémon Sleeping Snorlax in 2024. Read the article as we explore the techniques, locations, and special events that will increase your chances of capturing this Pokémon.

Part 1: What Is a Sleeping Snorlax in Pokémon GO

Part of the original 151 creatures in Pokémon GO, Snorlax is a Pokémon from the Pokémon franchise. It stands out as a normal type with notable Combat Power (CP) and endurance. Its substantial Hit Points (HP) and powerful moves make it a formidable defender in gyms, earning it a reputation as a resilient fighter.

Being one of the Z’s category Pokémon, known for their sleepy and relaxed nature, is reflected in its appearance. Snorlax Pokémon sleeping is a large, bear-like Pokémon with a big belly and is often found blocking paths in mainline Pokémon games.

In Pokémon GO, Snorlax can be encountered in the wild, but it is more commonly obtained through special events or raids. Like other Pokémon, Snorlax can be powered up and used in battles against other trainers or in raids. Below is a detailed table explaining everything about Snorlax:

Part 2: Is It Possible To Capture a Sleeping Snorlax in Pokémon GO?

When it comes to whether it is possible to capture a Snorlax sleeping Pokémon, the answer is a resounding yes. Being rare, the chances to encounter and capture have steadily risen compared to past years. With its formidable stats, Snorlax reaches an impressive maximum Combat Power (CP) of 3884.

At Pokémon Z’s Event 2023, participants had the chance to capture not only Snorlax but also its rare shiny variant. Moreover, after completing the special research task, users were able to encounter a Snorlax with a nightcap. To get Snorlax more easily, users are recommended to use Pokémon Go Plus +.

Utilizing advanced Bluetooth and low-energy technology, the Pokémon GO Plus + device establishes connections with both the Pokémon Sleep and Pokémon GO mobile applications. Its functionality extends to monitoring sleep, a feature it shares with Pokémon Sleep. All you need to do is hold the central button, put it near you, and go to sleep. It includes a Pikachu to sing you lullabies and work as a morning alarm.

Moreover, the Pokémon GO Plus + accessory facilitates the spinning of PokéStops. It enables the automatic throwing of different Poké Balls, Great Balls, and Ultra Balls. Thus eliminating the need to press any buttons. Below is a detailed table about the specifications of Pokémon GO Plus + to capture Snorlax sleeping Pokémon:

Thickness: 18.3mm

|
| Device Weight | 50g |
| Internal Battery |

Lithium-ion battery

Charges via USB Type-C

|
| Battery Charging Time | 3.5 Hours |
| Functions | Vibration and sounds |
| Platform/OS |

Android 7 and up

iOS 14 and up

|

Part 3: How To Catch a Sleeping Snorlax With the Help of Pokémon GO Plus+

With the release of Pokémon GO Plus + in July 2023, Nianticreleased a week-long “Catching Some Z’s” event. The main part of the event was to increase the spawned rate for Snorlax and a special encounter with a Snorlax with a nightcap. While the event has long finished, Pokémon GO Plus + remains.

Many users have reported increased sightings of Snorlax even after the event when using Pokémon GO Plus +. As discussed earlier, Pokémon GO Plus + uses Bluetooth to remain connected with the Pokémon GO app. Here are the steps you need to follow to pair Pokémon GO with the Pokémon GO Plus + for help in catching Pokémon Snorlax sleeping:

• Step 1. Begin by enabling Bluetooth, opening the Pokémon GO app on your device, and tapping the central Pokéball button. Now tap “Settings” from the top right corner and select “Connected Devices and Devices.”

• Step 2. On the following screen, press “Accessory Devices” to access the pairing menu. Now, move to Pokémon GO Plus + and press the main button. Once it appears in the “Available Devices” section of the Pokémon GO app, begin the pairing process following the on-screen instructions.

Part 4: Enhance Your Gaming Experience With One-Click Location Spoofer of 2024

Are you having issues with capturing Pokemon Snorlax sleeping despite employing Pokémon GO Plus +? Given the rarity and low spawning rate, capturing Snorlax can be hard. This becomes especially difficult if you are unable to travel long distances. To come to your rescue, there’s another useful tool at your disposal named Wondershare Dr.Fone - Virtual Location. Enabling you to simulate your location anywhere globally, it also incorporates lifelike movement.

With just one click, modify your GPS location effortlessly using this tool that smoothly integrates with both iOS and Android devices. This means you can easily explore diverse in-game terrains. It increases your chances of encountering Snorlax Sleeping Pokemon in various locations. Wondershare Dr.Fone gives you precise control over your virtual location, ensuring that you can navigate the Pokémon GO map with accuracy.

Standout Features of Dr.Fone - Virtual Location

1. Effortlessly import/export GPX files containing diverse paths, enabling you to save and view your preferred routes with a simple click.
2. When spoofing your GPS location on an iOS device, you don’t need to jailbreak it when using Dr.Fone - Virtual Location.
3. It offers you the flexibility to traverse at various simulated speeds, such as walking, cycling, driving, etc., ranging from 3.6 km/h to 108 km/h.

Steps To Enhance Your Gaming Experience With One-Click Location Spoofer of 2024

Save time and energy by using Wondershare Dr.Fone - Virtual Location feature. There is no need to physically travel to different places by simply adjusting your virtual location.

When coupled with powerful Pokémon GO Plus +, it can increase your chances of encountering Sleeping Snorlax significantly. Here is how to enhance your gaming experience and get help in capturing Pokémon sleeping Snorlax via Dr.Fone - Virtual Location:

• Step 1. Activate Teleport Mode in Dr.Fone - Virtual Location

Open Wondershare Dr.Fone - Virtual Location, connect your smartphone with an original USB cable, and choose the “Teleport Mode” option located in the top-right section. The specific icon for Teleport Mode is the first one from the left in that section. Once Teleport Mode is activated, click on the search bar at the top-left to input the desired location. After entering the location, press “Enter” to continue.

• Step 2. Teleport to the Chosen Location

As you enter the desired location, the map will confirm your selection. If you wish to teleport to this designated location, click on “Move Here.” The smartphone’s location will promptly switch to the chosen destination and reflect on the map. You can then verify that the Honor Magic Vs 2 device’s current location matches the updated location by opening the maps app on the Honor Magic Vs 2 device.

• Step 3. Simulate Movement with One-Stop Route

To simulate movement, navigate to the top-right section and click “One-Stop Route.” It is the third icon from the left. After moving to the desired location, tap anywhere on the map to designate your destination. Specify the number of round trips and opt for either a Round or Loop trip. Adjust the walking speed by sliding the speed option. Finally, tap “Move Here” for the movement simulation.

• Step 4. Enable the Multi-Stop Route Feature

If you want to visit more than one stop, enable the Multi-Stop Route mode. You can do it by accessing the top-right section adjacent to the One-Stop Route mode. Once activated, designate multiple locations on the map by selecting your desired points. Specify the number of trips and speed settings. Initiate the process by clicking on “Start Moving.” During the simulation, you can “Pause” the sequence at any point.

Conclusion

In conclusion, the pursuit of capturing a Snorlax Pokémon sleeping in Pokémon GO is an ever-evolving adventure. To enhance your gaming experience and increase your chances of success, consider incorporating Wondershare Dr.Fone - Virtual Location. With its one-click location spoofer, Dr.Fone adds versatility and efficiency to your exploration. It allows you to enjoy the thrill of the hunt without physical constraints.

Latest way to get Shiny Meltan Box in Pokémon Go Mystery Box On Honor Magic Vs 2

The news of every Pokémon Go player being able to shift to Pokémon Home was taken in with a flavorsome acceptance from the community of trainers. Home Event for the highly successful mobile game is advancing towards termination, and this has ensued in reckless people demanding to know ways to get a Mystery Box so they can acquire a Shiny Meltan.

Part 1: How to get a mystery box in Pokémon Go?

The Mystery Box is a particular object in Pokémon Go that briefly roots the mythical Pokémon Meltan to emerge in the wild. To receive a Mystery Box in the game, you should connect your Pokémon Go and Home accounts in the first place. Furthermore, you should relocate one Pokémon Go character at the very least to Home to attain a Mystery Box that can entice Shiny Meltan.

Reportedly, you are required to have the mobile version of Home connected to your Nintendo Account. This can be carried out simply by downloading the Home app from Your Honor Magic Vs 2 store and tracking the instructions given on your screen in the initialization process of your app. After connecting the mobile Home application to your Nintendo account, track the steps below to connect Pokémon go to Home App:

• Start Pokémon Go.
• Click the PokeBall icon on the map at the bottom.
• Advance to ‘Settings’ and scroll downwards and click Pokémon Home

• Click ‘Sign In’ in your Nintendo Account. A pop up will appear asking for permission to sign in to ‘nintendo.com,’ pressing “Continue” will redirect to the website to log in.

• Enter your username and password. Press ‘OK’ to return to the previous screen.

On execution of the above instructions, follow the directions below to move a Pokémon Go creature to Home App:- Open Pokémon Go and access the ‘Main Menu’ by pressing the PokeBall icon.

• Open ‘Settings’ and go to Home.

• Press on ‘Send Pokémon’

• Press Continue

• Select the Pokémon you want to relocate
• Click ‘Next’

• Tap ‘Transport’ to accept after confirming your pick.

• Press ‘Done’

• Open Pokémon Home on mobile.
• Click on the screen to start.

• Click ‘Yes’ on the Pokémon Go Link message.

• Select ‘View Transferred Pokémon’

• Confirm that you want to Receive by pressing ‘Receive Pokémon’

By following the steps above, you will be awarded a Mystery Box in Pokémon Go, and you can activate it by advancing to your item bag.

Use Virtual Location to catch the Pokémon Go creature

You can use the faux location of Dr. Fone to imitate your orientation without making a move and collect exclusive Pokémon. The mock location of Dr.Fone lets you simulate your position and permits your mobile application to presume that you have selected the application interface of Dr.Fone without any restrain or recognition from developers of Pokémon Go. Follow the instructions below to catch Pokémon any place without making any movement.

Step 1: Install:

Install the ‘Dr. Fone toolkit’ from the official website after downloading it. After installation, launch the toolkit and select the ‘Virtual Location’ tab.

Step 2: Connect:

Subsequently, connect your PC or laptop with the Dr. Fone application. Also, permit the location services to retrieve the location of your device. Then, press on the ‘Get Started’ button to use the services of Dr. Fone.

Step 3: Imitate your GPS position:

Select your current location on the map. Next, click the leftmost button on the top-right corner of the window to start the ‘Teleport’ mode. Then search the places you wish to mock your position with, and press ‘Go’ after the selection.

Step 4: Imitate Movement between steps:

To start the simulation, make a movement and traverse to the ‘Move Here’ button to reach multiple times. By default, the motion is adjusted to ‘1’, but it can be replaced by the user to switch the program correspondingly.

The simulated position will emerge as genuine for the Pokémon Go app, and it will believe that you are moving between the two designated positions chosen on the Dr. Fone GUI screen. At the foot of the screen, the motion speed can also be tuned using the sliding menu. This way, you can use the false maneuver of the position of Dr. Virtual Fone without having the need to understand it. Also, your application will not be banned.

Step 5: Movement Simulation between more than two spots:

Dr. Fone’s application also permits you to replicate activity between more than two sites. The component is called after the multi-stop path that can be chosen from the GUI toolbox class positioned at the top-right nook that lets you put numerous specified destinations on the map, and your position will behave appropriately as controlled by the virtual location application of Dr.Fone.

To grant permission to the system to mock movement by picking out the right options, press the ‘March’ button. You will be required to do the Pokémon Go walking illusion at some point. Dr. Fone’s virtual movement imitation application eases your life and lets you do the job without being concerned about travel costs.

Part 2: How to get Shiny Meltan in Pokémon Go?

Meltan is a legendary steel-type Pokémon that was initially launched in Pokémon Go. It is original since each and every other Pokémon has been announced in either the main games or using the Pokémon animation. Meltan has very restricted accessibility and Meltan evolution, Melmetal can yet solely be evolved in Pokémon Go. Until now, there were only two ways of catching Meltan - transferring a Pokémon from Pokémon Go to Pokémon Home or associating your Pokémon Go account to Let’s Go, Pikachu! or Let’s Go, Eevee! Now there is another way of capturing Meltan, that is, by opening a mystery box. You can get a Mystery Box that opens once a week by connecting your ‘Pokémon Go’ and ‘Pokémon Home’ accounts as described earlier.

The Mystery Box will act as an essence precisely for Meltan, attracting a large amount of the small Hex Nut Pokémon to your locality for one hour. It takes time to recharge, about three days, but after it is charged, you have to transfer another Pokémon to HOME to be able to use it again for an hour. If you get to use the Mystery Box in the course of specific events, you can even grab a Shiny Meltan.

Conclusion

Pokémon is one of the most enjoyable games, not only because it yields prizes such as the mystery box Pokémon, Meltan Pokémon, shiny Meltan Pokémon go, but it also develops players’ interest completely. It manifests a 3D view making it appear as the actual life. Furthermore, with an application like Dr. Fone Virtual Location, you turn out to be an addict as it helps you imitate your GPS position and proceed across the path you set up on the map.