How Can I Catch the Regional Pokémon without Traveling On Poco X6 Pro

The main goal that the designers of Pokémon Go had in mind for the past few years was to create a framework that prompts players to get off their loungers and go into the real world in search of Pokémon. If you are wondering why there are certain types of Pokémon enlisted as ‘blanks’ in your Pokedex and you haven’t yet found them, it’s probably because they are marked as ‘regional’ types. This means that these Pokémon are exclusively locked in select regions around the world. Don’t Panic! You don’t have to spend a boat load of cash in order to catch these special regional Pokémon as there are tricks you can apply to catch them without even stepping out of your kitchen.

Part 1: List of the regional Pokémon that have been announced

Since the game publishers released these special regional Pokémon, they have been locked in their geo-specific locations around the world. There is a set or pair of regional Pokémon for each generation that has been introduced into the game. Regions may not be defined by real-time borders but are divided according to the type of the Pokémon and the place they are more likely to spawn.

These places may be specific to countries (Tauros spawn in the US), specific to a continent (Mr.Mime Spawn in Europe), specific to a region (Corsola spawn in the Tropics), and even certain halves of the planet (Lunastone and Solrock spawn in the Southern half and Northern half of the equator, respectively). These Pokémon are not necessarily rare spawn types. If you are traveling in their region, they may pop up quite frequently. You should take note that regional Pokémon won’t become available in Gyms or in Nests since they will only spawn in the wild. However, you can yet find them through eggs but only in their specific regions.

There are some exceptions among the regionals as well. These exceptions are known to swap their spawn locations or drop out of regional exclusivities like Zangoose and Seviper, or Minun and Plusle. Some regional Pokémon may also turn up in special in-game events like how Farfetch’d spawned during the 2017 Pokémon Go Travel Challenge.

If you are not a frequent traveler or know fellow trainers who are willing to trade their regional Pokémon then you may need to be patient and follow a few extra steps in order to get your hands on these rare types of Pokémon.

List of different Regional Pokémon – Where and How to Catch them All!

As of now, there are over 40 different regional Pokémon divided across generations that can be captured or hatched only in specific expanses of the world. There are of course occasional overlaps of Pokémon slipping out of their region and into other sectors. Let’s get into the list of all the region-specific Pokémon of different generations and where to find them.

Gen 1/ Kanto Pokémon

• Taouros: North America.
• Farfetch’d: Asia.
• Mr. Mime: Europe.
• Kangashkhan: Australia/Pacific.

Gen 2/ Johto Pokémon

• Heracross: South America/ Southern Florida.
• Corsola: Equatorial Latitudes.

Gen 3/ Hoenn Pokémon

• Tropius: The Middle East and Africa.
• Torkoal: Southeast Asia.
• Volbeat: Europe, Australia, and Asia.
• Relicanth: The Cook Islands/New Zealand.
• Solrock: Currently America and Africa. Switches with Lunastone.
• Lunastone: Currently Europe and Asia. Switches with Solrock.
• Illumise: America and Africa.
• Seviper: Currently America and Africa. Switches with Zangoose.
• Zangoose: Currently in Europe, Australia, and Asia. Switches with Seviper.

Gen 4/ Sinnoh Pokémon

• Pachirisu: Canada.
• Chatot: Southern Hemisphere.
• Shellos: Pink Variant – Western Hemisphere. Blue Variant – Eastern Hemisphere.
• Carnivine: Southeastern United States.
• Uxie: Available on select raid periods. Asia and Pacific.
• Azelf: Available on select raid periods. America.
• Mesprit: Available on select raid periods. Middle East, Africa, and India.

Gen 5/ Unova Pokémon

• Pansear: The Middle East, Africa, India, and Europe.
• Pansage: Asia/Pacific.
• Heatmor: Western Hemisphere. Switches with Durant.
• Durant: Eastern Hemisphere. Switches with Heatmor.

Part 2: How to use Dr.Fone - Virtual Location to catch Regional Pokémon

Catching regionally exclusive Pokémon requires you to travel to that location or region where the Pokémon is located, as it was originally intended by the game. Remember that Pokémon Go functions by tracking your location via GPS. Your GPS however, is a virtual means of tracking your IP address which can be faked using the right mock GPS and VPN. You can use a mock virtual location to fake your actual location and make it seem like you’re traveling around the world. The game itself would be tricked, allowing you to travel to regions and get your hands on those geo-exclusive Pokémon.

To get the best out of your mock location and also to avoid the risk of hitting a light ban on your account, Dr.Fone Virtual Location by Wondershare has been reviewed as a Mock GPS you can easily rely on. It offers a number of features that can come in handy while faking your location such as adjusting the speed so that it may seem like you’re actually traveling, you can use a 360-degree virtual joystick for manual control over your movements and you can also select specific routes on the map on which you want your in-game avatar to move on.

Step-by-Step Tutorial

You can follow these easy steps to set up and access your Dr.Fone Virtual Location in an instant and teleport to anywhere in the world.

Step 1: Download the Program

Download Dr.Fone – Virtual Location. Install and launch the program. Click ‘Virtual Location’ to get access to the options window.

Step 2: Connect Device

Get the USB cable and connect your iPhone to the PC. And then click ‘Get Started’ to proceed.

Step 3: Check the Location

When the location map opens, click on ‘Centre On’ to accurately pinpoint the GPS to your location.

Step 4: Activate teleport mode

Now, click on the icon given in the upper right-hand corner. Enter your desired location on the upper right field and then click ‘Go’.

Step 5: Start Teleporting

Once the location of your choice pops up, click ‘Move here’ in the pop-up box.

Once the location has been changed, you can center your GPS or move the location on your device, it will still be set to the location you have selected.

Part 3: Tips to help catch Regional Pokémon

Catching regional Pokémon is just like catching any regular Pokémon. When they spawn near your location, you catch it by throwing a Poke ball at it. If the Poke ball is seen shaking, it means that the Pokémon is resisting and may just pop out from the ball in which case you may have to throw another one at it. Now, if you are traveling and you have limited time or a number of spawns then here are a few tips you can utilize to enhance your chances of landing a catch.

• Curve Ball: Practice your curveball throws. Throwing a curve ball automatically increases your chances of preventing a Pokémon from slipping through your hands, plus you also get a 17x bonus with each successful curve catch.
• Maximize your Medals: Medals increase your performance in the game without costing you any extra resources like Great balls, Ultra Balls, or Razz Balls. So, try and max out your medals to increase your chances of catching rare Pokémon, especially the exclusive ones.
• Keep Consistent: The algorithm of the game is quite complex but eventually, a pattern emerges. You will notice that if you keep practicing with great or excellent catches with the smaller (low XP) Pokémon, it increases your chances of catching the ones that put up a fight.
• Save your Berries: Feeding a Pokémon with Razz Berries increases your assurances of catching the Pokémon while also giving you a 15x bonus when you land a successful catch. Save your berries for those persistent Pokémon spawns.
• Use Powerful Poke balls: Last but definitely not least, use powerful balls like the Great Ball or Ultra Ball to maximize your chances of catching Pokémon. You should also remember that these are diminishable resources so use them wisely. On catching a Pokémon with a Great ball you will get 15x and with an Ultra ball you would get 2x so utilize them accordingly to catch rare and super rare Pokémon.

Conclusion

The journey to completing your Pokedex may not be a short one as there are hundreds of Pokémon out there, and even hundreds more yet to be introduced into the game. Traveling the world in search of the rarest regional Pokémon is meant to be a fun and exciting experience, yet it may not be viable for some who wish to enjoy the game to the fullest. Utilizing a fake GPS and VPN can bridge the gaps in your Pokedex and keep the game fun for you at the same time. So keep playing and catching Pokémon as there are loads of other exciting installments yet to be introduced by Niantic in the future.

4 solution to get rid of pokemon fail to detect location On Poco X6 Pro

Pokémon go failed to detect location is an error that is frequently faced by the players and there are several reasons for it. From device to server-based all the reasons amount to the error and therefore the right solution must be applied to get the work done with ease and perfection. The location-based attribute of the game is something that has been one of the best features. It is the sole reason for which the game is not only popular but also one of the most downloaded games of all time. It is therefore important to overcome fail to detect location error in this game.

Part 1: Why does Pokémon fail to detect location?

The two main and frequent errors that are related to the Pokémon are error 11 and error 12. These not only frustrate the users but also hamper the game experience. Failed to detect location Pokémon go is the result. This part of the article will make sure that you get all the information that is needed to overcome the issue. The GPS joystick failed to detect location error will also be overcome and you will also be able to guide others.

Causes of Error 11

1. If the game failed to detect location Pokémon go fake GPS then the most common reason is the fact that the GPS has been disabled. The internet and GPS are the two important aspects of this game. If anyone is not available then it is a must that the game will not work at all.
2. Once the game has been installed it requires certain permissions that should be granted for proper working. All the permissions must be accepted for the game to work fine. If the GPS access has not been granted then it should be so that the GPS joystick Pokémon go failed to detect location error is resolved and you can enjoy the game.
3. To install some applications and to enhance the features of the phone it is at times rooted in the case of android or jailbroken in the case of iPhone. In both cases, you will get the Pokémon to go failed to detect location fake GPS error. It is therefore important that the issue is resolved by getting the Poco X6 Pro device back to its original shape. It can be done by unrooting the Poco X6 Pro devices so that the issue is resolved.

Causes of Error 12

1. The Mock location on the Poco X6 Pro device is enabled can lead to failed to detect location GPS joystick or error 12 on the Poco X6 Pro device. It is therefore advised to make sure that the location in question is disabled to get the gaming experience back on track.
2. The other and the most common reason for the error 12 is the fact that the GPS signals are not received by the Poco X6 Pro device. It also leads to Pokémon failed to detect location error and will make sure that you get all the enjoyment for which the game has been downloaded.

Part 2: 3 solutions to fix Pokémon fails to detect the location

Solution 1: Turn on GPS

This is the most common method that can be applied to make sure that the game works perfectly.

i. Drag the notification panel down on your device.

ii. Click on the location to turn it ON.

Solution 2: Setting Permissions for the application

If the right permissions are not given to the application then it can also lead to the fake GPS failed to detect location. To make sure that this is overcome you need to follow the steps as under.

i. Go to Settings > Applications > Apps to access the permissions for the application.


ii. Go to Pokémon Go > Permissions > Turn on location to get the issue resolved.

Solution 3: Clear Cache

i. Go to the Settings of your device

ii. Click on the app’s icon on the next screen

iii. Click on the storage option.

iv. Clear data and cache and restart the Poco X6 Pro device to get the issue fixed.

Part 3: Dr.Fone Virtual location change your location in one click

To fix the fake GPS Pokémon go failed to detect location Dr. Fone’s virtual location is the best and the state of the art program that can be used. It is not only the best but also allows the users to overcome the issues that are presented by the other similar programs. With this program, it is easy to make sure that the overall game performance improves in terms of location detection. You can teleport with ease using this program. With an intuitive interface and a professional team backing the program, you get the ultimate results. Not only Pokémon but all the location-based and AR games this program is a boon.

How to use Dr. Fone Virtual Location

Step 1: Program Installation

First of all download and install the program to get started.

Step 2: Enable Virtual Location

Click the get started icon once the iPhone has been connected to the system and the virtual location has been enabled.

Step 3: Locate the Poco X6 Pro device

Click the center on a button to make sure that your location is detected by the program.

Step 4: Change Location

The third icon on the upper right corner is to be pressed to teleport. In the bar type the name of the location you want to teleport to.

Step 5: Move to a teleported location

Click on move here to get to the location that has been selected.

Step 6: Validation

Your iPhone will show the same location as on the program and this finishes the process.

Conclusion

Dr. Fone’s virtual location is the best and the most advanced program that will make sure that you get the best results. It will not only enhance your gaming experience but will also remove the Pokémon go GPS joystick that failed to detect location error with perfection. It is the best program that is easy to use and there are guides online that further foster the process. With this program, it is easy to get a step ahead for all AR and location-based games and to enjoy to your fullest.

Additional Tips About Sinnoh Stone For Poco X6 Pro

Sinnoh Stones are similar to other evolutionary items found in Pokemon Go, like Metal Coat, Dragon Scale, and Sun Stones. Pokemon Go’s Sinnoh Stone is a rare evolution item enabling you to upgrade existing creatures into Gen 4 versions. It is extremely exciting to see your favorite Pokemon’s being upgraded, also making the best Pokemons of the game more powerful. The Pokemon Go Sinnoh Stone evolution list is also provided in the guide, which contains 18 Sinnoh Stone Evolutions.

Part 1: Understanding the idea of Pokemon Go Sinnoh Stone

The Sinnoh Stone is a new evolution item, and all eighteen-4th generation Pokémon’s require Sinnoh Stones for their evolution. It also allows Gen 1 and 2 Pokémon’s to evolve into Gen 4 evolution stages. The Sinnoh Stones items are used for all cross-generation evolutions. Below is the listing of Pokémon’s, which evolve using a Sinnoh Stone.

Pokemon	Evolves
Misdreavus	Mismagius
Gligar	Gliscor
Yanma	Yanmega
Electabuzz	Electivire
Magmar	Magmortar
Porygon2	Porygon-Z
Roselia	Roserade
Togetic	Togekiss
Tangela	Tangrowth
Sneasel	Weavile
Murkrow	Honchkrow
Dusclops	Dusknoir
Snorunt	Froslass
Rhydon	Rhyperior
Lickitung	Lickilicky
Aipom	Ambipom
Swinub	Mamoswine
Kirlia	Gallade

Part 2: Obtaining Sinnoh Stones to Level Up

Sinnoh Stone can be obtained during the battle against the three leaders on Community Day, on the completion of the final day of your 7-day Research Task, and During PVP. You won’t be finding them at Poke Stops. Main places where you can find Sinnoh Stones are on the 7th Day of your Research Task and award for taking part in PVP. Another place that is not popular but odds to find Sinnoh Stone is present includes the introduction to PVP when you’re new to it. Players can obtain up to 10 Sinnoh Stones during the February Community Day and when the month is Pokemon Go Community Day. 5 Sinnoh Stones can be obtained by beating the three leaders in the battles and another 5 from winning PVP battles against friends. Defeating a Team Go Rocket Leader and Go Battle Reward is Sinnoh Stone.

You can use Dr. Fone’s Virtual Location to mock your location without any movement and obtain these Sinnoh Stones. Dr.Fone’s virtual location allows you to mock your location and lets the application on your phone think that you’re at a place selected in Dr.Fone’s application interface without resulting in any ban or detection from Pokemon Go developers. You can follow the steps listed below in order to catch Pokemon by one click to go anywhere without moving.

Step 1: Mocking Location Quirk:

Pokemon Go can be played by using the toolkit of Dr. Fone without shifting. Open the Virtual Location feature using a functioning lightning cable to mock the location and ensure that the iOS device is linked to the application.

You can press the Get Started” button to start the process upon phone detection.

Step 2: Imitating Movement between steps:

Open the first choice located in the top-right corner until you enter Dr.Fone’s GUI, which helps you to fake movement between the two locations. Select the location pin found in the search bar and press the “Move Here” button.

You want to make a motion, and navigate to the “March” button to start the simulation, enter the magnitude of times. By default, the movement is set to one, but the user can override it, and the application will move accordingly.

For the Pokemon Go application, the new position will appear as real and will presume that you are walking between the two selected locations you have selected on the Dr. Fone screen. The walking pace can also be changed at the bottom of the screen using the sliding menu. This way, without knowing it, you can use the fake movement of the desired position, and your application will not be prohibited.

Step 3: Movement Simulation between more than two spots:

The application by Dr.Fone also helps you to mock movement between more than two spots. The function is named after the multi-stop route that can be selected from the toolbox category gui found at the top-right corner, which lets you drop different unique stops located on the map, and your location will behave accordingly as handled by Dr.Fone’s virtual location application.

Click the ‘March’ button to allow the system to simulate motion by selecting the correct options. You’ll have to do the Pokémon Go walking trick at some point. The virtual motion simulation software for Dr. Fone makes your life easier and helps you to do the job without thinking about travel costs.

Part 3: Essential Requirement and Evolving Pokémon’s Using Sinnoh Stone

Only the trainers above the 10th Level have access to acquire Sinnoh Stone. The Sinnoh Stone can be obtained from Training Battles and Training with Team Leaders. You also need 100 candies for each of the Pokemon. Once you have got your hands on Sinnoh Stones and now you want to know where they should be used, there’s numerous 4th generation Pokémon who require Sinnoh Stone for their upgrade. Mamoswine is one of the best if you’re prioritizing attackers for a raid because it has a mix of extremely high CP with the strong ground and ice-type moves.

Conclusion

Sinnoh Stone, a rare evolution item, is one of the Perks of Pokemon Go letting you evolve your favorite Pokemon and keep them throughout your journey in the game. Dr.Fone’s virtual application lets you find them with ease without any real movement on your part and helps you enjoy the game to the fullest.