How Can I Catch the Regional Pokémon without Traveling On Poco F5 Pro 5G

The main goal that the designers of Pokémon Go had in mind for the past few years was to create a framework that prompts players to get off their loungers and go into the real world in search of Pokémon. If you are wondering why there are certain types of Pokémon enlisted as ‘blanks’ in your Pokedex and you haven’t yet found them, it’s probably because they are marked as ‘regional’ types. This means that these Pokémon are exclusively locked in select regions around the world. Don’t Panic! You don’t have to spend a boat load of cash in order to catch these special regional Pokémon as there are tricks you can apply to catch them without even stepping out of your kitchen.

Part 1: List of the regional Pokémon that have been announced

Since the game publishers released these special regional Pokémon, they have been locked in their geo-specific locations around the world. There is a set or pair of regional Pokémon for each generation that has been introduced into the game. Regions may not be defined by real-time borders but are divided according to the type of the Pokémon and the place they are more likely to spawn.

These places may be specific to countries (Tauros spawn in the US), specific to a continent (Mr.Mime Spawn in Europe), specific to a region (Corsola spawn in the Tropics), and even certain halves of the planet (Lunastone and Solrock spawn in the Southern half and Northern half of the equator, respectively). These Pokémon are not necessarily rare spawn types. If you are traveling in their region, they may pop up quite frequently. You should take note that regional Pokémon won’t become available in Gyms or in Nests since they will only spawn in the wild. However, you can yet find them through eggs but only in their specific regions.

There are some exceptions among the regionals as well. These exceptions are known to swap their spawn locations or drop out of regional exclusivities like Zangoose and Seviper, or Minun and Plusle. Some regional Pokémon may also turn up in special in-game events like how Farfetch’d spawned during the 2017 Pokémon Go Travel Challenge.

If you are not a frequent traveler or know fellow trainers who are willing to trade their regional Pokémon then you may need to be patient and follow a few extra steps in order to get your hands on these rare types of Pokémon.

List of different Regional Pokémon – Where and How to Catch them All!

As of now, there are over 40 different regional Pokémon divided across generations that can be captured or hatched only in specific expanses of the world. There are of course occasional overlaps of Pokémon slipping out of their region and into other sectors. Let’s get into the list of all the region-specific Pokémon of different generations and where to find them.

Gen 1/ Kanto Pokémon

• Taouros: North America.
• Farfetch’d: Asia.
• Mr. Mime: Europe.
• Kangashkhan: Australia/Pacific.

Gen 2/ Johto Pokémon

• Heracross: South America/ Southern Florida.
• Corsola: Equatorial Latitudes.

Gen 3/ Hoenn Pokémon

• Tropius: The Middle East and Africa.
• Torkoal: Southeast Asia.
• Volbeat: Europe, Australia, and Asia.
• Relicanth: The Cook Islands/New Zealand.
• Solrock: Currently America and Africa. Switches with Lunastone.
• Lunastone: Currently Europe and Asia. Switches with Solrock.
• Illumise: America and Africa.
• Seviper: Currently America and Africa. Switches with Zangoose.
• Zangoose: Currently in Europe, Australia, and Asia. Switches with Seviper.

Gen 4/ Sinnoh Pokémon

• Pachirisu: Canada.
• Chatot: Southern Hemisphere.
• Shellos: Pink Variant – Western Hemisphere. Blue Variant – Eastern Hemisphere.
• Carnivine: Southeastern United States.
• Uxie: Available on select raid periods. Asia and Pacific.
• Azelf: Available on select raid periods. America.
• Mesprit: Available on select raid periods. Middle East, Africa, and India.

Gen 5/ Unova Pokémon

• Pansear: The Middle East, Africa, India, and Europe.
• Pansage: Asia/Pacific.
• Heatmor: Western Hemisphere. Switches with Durant.
• Durant: Eastern Hemisphere. Switches with Heatmor.

Part 2: How to use Dr.Fone - Virtual Location to catch Regional Pokémon

Catching regionally exclusive Pokémon requires you to travel to that location or region where the Pokémon is located, as it was originally intended by the game. Remember that Pokémon Go functions by tracking your location via GPS. Your GPS however, is a virtual means of tracking your IP address which can be faked using the right mock GPS and VPN. You can use a mock virtual location to fake your actual location and make it seem like you’re traveling around the world. The game itself would be tricked, allowing you to travel to regions and get your hands on those geo-exclusive Pokémon.

To get the best out of your mock location and also to avoid the risk of hitting a light ban on your account, Dr.Fone Virtual Location by Wondershare has been reviewed as a Mock GPS you can easily rely on. It offers a number of features that can come in handy while faking your location such as adjusting the speed so that it may seem like you’re actually traveling, you can use a 360-degree virtual joystick for manual control over your movements and you can also select specific routes on the map on which you want your in-game avatar to move on.

Step-by-Step Tutorial

You can follow these easy steps to set up and access your Dr.Fone Virtual Location in an instant and teleport to anywhere in the world.

Step 1: Download the Program

Download Dr.Fone – Virtual Location. Install and launch the program. Click ‘Virtual Location’ to get access to the options window.

Step 2: Connect Device

Get the USB cable and connect your iPhone to the PC. And then click ‘Get Started’ to proceed.

Step 3: Check the Location

When the location map opens, click on ‘Centre On’ to accurately pinpoint the GPS to your location.

Step 4: Activate teleport mode

Now, click on the icon given in the upper right-hand corner. Enter your desired location on the upper right field and then click ‘Go’.

Step 5: Start Teleporting

Once the location of your choice pops up, click ‘Move here’ in the pop-up box.

Once the location has been changed, you can center your GPS or move the location on your device, it will still be set to the location you have selected.

Part 3: Tips to help catch Regional Pokémon

Catching regional Pokémon is just like catching any regular Pokémon. When they spawn near your location, you catch it by throwing a Poke ball at it. If the Poke ball is seen shaking, it means that the Pokémon is resisting and may just pop out from the ball in which case you may have to throw another one at it. Now, if you are traveling and you have limited time or a number of spawns then here are a few tips you can utilize to enhance your chances of landing a catch.

• Curve Ball: Practice your curveball throws. Throwing a curve ball automatically increases your chances of preventing a Pokémon from slipping through your hands, plus you also get a 17x bonus with each successful curve catch.
• Maximize your Medals: Medals increase your performance in the game without costing you any extra resources like Great balls, Ultra Balls, or Razz Balls. So, try and max out your medals to increase your chances of catching rare Pokémon, especially the exclusive ones.
• Keep Consistent: The algorithm of the game is quite complex but eventually, a pattern emerges. You will notice that if you keep practicing with great or excellent catches with the smaller (low XP) Pokémon, it increases your chances of catching the ones that put up a fight.
• Save your Berries: Feeding a Pokémon with Razz Berries increases your assurances of catching the Pokémon while also giving you a 15x bonus when you land a successful catch. Save your berries for those persistent Pokémon spawns.
• Use Powerful Poke balls: Last but definitely not least, use powerful balls like the Great Ball or Ultra Ball to maximize your chances of catching Pokémon. You should also remember that these are diminishable resources so use them wisely. On catching a Pokémon with a Great ball you will get 15x and with an Ultra ball you would get 2x so utilize them accordingly to catch rare and super rare Pokémon.

Conclusion

The journey to completing your Pokedex may not be a short one as there are hundreds of Pokémon out there, and even hundreds more yet to be introduced into the game. Traveling the world in search of the rarest regional Pokémon is meant to be a fun and exciting experience, yet it may not be viable for some who wish to enjoy the game to the fullest. Utilizing a fake GPS and VPN can bridge the gaps in your Pokedex and keep the game fun for you at the same time. So keep playing and catching Pokémon as there are loads of other exciting installments yet to be introduced by Niantic in the future.

Catch or Beat Sleeping Snorlax on Pokemon Go For Poco F5 Pro 5G

Embracing new challenges and seeking out rare creatures to add to their Pokédex consistently excites Pokémon GO players. The coveted reward for players globally, Snorlax, a legendary Pokémon, is widely recognized as the iconic Sleeping Snorlax. Despite being one of the original 151 Pokémon in Pokémon GO, capturing Snorlax remains exceptionally challenging. It falls under Z’s category of Pokémons, which also includes Komala and Abra.

This makes it a unique challenge for trainers seeking to add this heavyweight Pokémon to their collection. In this guide, we will go through the latest strategies and updates in the Pokémon GO universe. The aim is to reveal the secrets to catching a Pokémon Sleeping Snorlax in 2024. Read the article as we explore the techniques, locations, and special events that will increase your chances of capturing this Pokémon.

Part 1: What Is a Sleeping Snorlax in Pokémon GO

Part of the original 151 creatures in Pokémon GO, Snorlax is a Pokémon from the Pokémon franchise. It stands out as a normal type with notable Combat Power (CP) and endurance. Its substantial Hit Points (HP) and powerful moves make it a formidable defender in gyms, earning it a reputation as a resilient fighter.

Being one of the Z’s category Pokémon, known for their sleepy and relaxed nature, is reflected in its appearance. Snorlax Pokémon sleeping is a large, bear-like Pokémon with a big belly and is often found blocking paths in mainline Pokémon games.

In Pokémon GO, Snorlax can be encountered in the wild, but it is more commonly obtained through special events or raids. Like other Pokémon, Snorlax can be powered up and used in battles against other trainers or in raids. Below is a detailed table explaining everything about Snorlax:

Part 2: Is It Possible To Capture a Sleeping Snorlax in Pokémon GO?

When it comes to whether it is possible to capture a Snorlax sleeping Pokémon, the answer is a resounding yes. Being rare, the chances to encounter and capture have steadily risen compared to past years. With its formidable stats, Snorlax reaches an impressive maximum Combat Power (CP) of 3884.

At Pokémon Z’s Event 2023, participants had the chance to capture not only Snorlax but also its rare shiny variant. Moreover, after completing the special research task, users were able to encounter a Snorlax with a nightcap. To get Snorlax more easily, users are recommended to use Pokémon Go Plus +.

Utilizing advanced Bluetooth and low-energy technology, the Pokémon GO Plus + device establishes connections with both the Pokémon Sleep and Pokémon GO mobile applications. Its functionality extends to monitoring sleep, a feature it shares with Pokémon Sleep. All you need to do is hold the central button, put it near you, and go to sleep. It includes a Pikachu to sing you lullabies and work as a morning alarm.

Moreover, the Pokémon GO Plus + accessory facilitates the spinning of PokéStops. It enables the automatic throwing of different Poké Balls, Great Balls, and Ultra Balls. Thus eliminating the need to press any buttons. Below is a detailed table about the specifications of Pokémon GO Plus + to capture Snorlax sleeping Pokémon:

Thickness: 18.3mm

|
| Device Weight | 50g |
| Internal Battery |

Lithium-ion battery

Charges via USB Type-C

|
| Battery Charging Time | 3.5 Hours |
| Functions | Vibration and sounds |
| Platform/OS |

Android 7 and up

iOS 14 and up

|

Part 3: How To Catch a Sleeping Snorlax With the Help of Pokémon GO Plus+

With the release of Pokémon GO Plus + in July 2023, Nianticreleased a week-long “Catching Some Z’s” event. The main part of the event was to increase the spawned rate for Snorlax and a special encounter with a Snorlax with a nightcap. While the event has long finished, Pokémon GO Plus + remains.

Many users have reported increased sightings of Snorlax even after the event when using Pokémon GO Plus +. As discussed earlier, Pokémon GO Plus + uses Bluetooth to remain connected with the Pokémon GO app. Here are the steps you need to follow to pair Pokémon GO with the Pokémon GO Plus + for help in catching Pokémon Snorlax sleeping:

• Step 1. Begin by enabling Bluetooth, opening the Pokémon GO app on your device, and tapping the central Pokéball button. Now tap “Settings” from the top right corner and select “Connected Devices and Devices.”

• Step 2. On the following screen, press “Accessory Devices” to access the pairing menu. Now, move to Pokémon GO Plus + and press the main button. Once it appears in the “Available Devices” section of the Pokémon GO app, begin the pairing process following the on-screen instructions.

Part 4: Enhance Your Gaming Experience With One-Click Location Spoofer of 2024

Are you having issues with capturing Pokemon Snorlax sleeping despite employing Pokémon GO Plus +? Given the rarity and low spawning rate, capturing Snorlax can be hard. This becomes especially difficult if you are unable to travel long distances. To come to your rescue, there’s another useful tool at your disposal named Wondershare Dr.Fone - Virtual Location. Enabling you to simulate your location anywhere globally, it also incorporates lifelike movement.

With just one click, modify your GPS location effortlessly using this tool that smoothly integrates with both iOS and Android devices. This means you can easily explore diverse in-game terrains. It increases your chances of encountering Snorlax Sleeping Pokemon in various locations. Wondershare Dr.Fone gives you precise control over your virtual location, ensuring that you can navigate the Pokémon GO map with accuracy.

Standout Features of Dr.Fone - Virtual Location

1. Effortlessly import/export GPX files containing diverse paths, enabling you to save and view your preferred routes with a simple click.
2. When spoofing your GPS location on an iOS device, you don’t need to jailbreak it when using Dr.Fone - Virtual Location.
3. It offers you the flexibility to traverse at various simulated speeds, such as walking, cycling, driving, etc., ranging from 3.6 km/h to 108 km/h.

Steps To Enhance Your Gaming Experience With One-Click Location Spoofer of 2024

Save time and energy by using Wondershare Dr.Fone - Virtual Location feature. There is no need to physically travel to different places by simply adjusting your virtual location.

When coupled with powerful Pokémon GO Plus +, it can increase your chances of encountering Sleeping Snorlax significantly. Here is how to enhance your gaming experience and get help in capturing Pokémon sleeping Snorlax via Dr.Fone - Virtual Location:

• Step 1. Activate Teleport Mode in Dr.Fone - Virtual Location

Open Wondershare Dr.Fone - Virtual Location, connect your smartphone with an original USB cable, and choose the “Teleport Mode” option located in the top-right section. The specific icon for Teleport Mode is the first one from the left in that section. Once Teleport Mode is activated, click on the search bar at the top-left to input the desired location. After entering the location, press “Enter” to continue.

• Step 2. Teleport to the Chosen Location

As you enter the desired location, the map will confirm your selection. If you wish to teleport to this designated location, click on “Move Here.” The smartphone’s location will promptly switch to the chosen destination and reflect on the map. You can then verify that the Poco F5 Pro 5G device’s current location matches the updated location by opening the maps app on the Poco F5 Pro 5G device.

• Step 3. Simulate Movement with One-Stop Route

To simulate movement, navigate to the top-right section and click “One-Stop Route.” It is the third icon from the left. After moving to the desired location, tap anywhere on the map to designate your destination. Specify the number of round trips and opt for either a Round or Loop trip. Adjust the walking speed by sliding the speed option. Finally, tap “Move Here” for the movement simulation.

• Step 4. Enable the Multi-Stop Route Feature

If you want to visit more than one stop, enable the Multi-Stop Route mode. You can do it by accessing the top-right section adjacent to the One-Stop Route mode. Once activated, designate multiple locations on the map by selecting your desired points. Specify the number of trips and speed settings. Initiate the process by clicking on “Start Moving.” During the simulation, you can “Pause” the sequence at any point.

Conclusion

In conclusion, the pursuit of capturing a Snorlax Pokémon sleeping in Pokémon GO is an ever-evolving adventure. To enhance your gaming experience and increase your chances of success, consider incorporating Wondershare Dr.Fone - Virtual Location. With its one-click location spoofer, Dr.Fone adds versatility and efficiency to your exploration. It allows you to enjoy the thrill of the hunt without physical constraints.

9 Mind-Blowing Tricks to Hatch Eggs in Pokemon Go Without Walking On Poco F5 Pro 5G

“I have been playing Pokemon Go for over a year now, but I always find it hard to hatch new eggs. It needs so much walking, and I can’t do that because of my work – as I don’t get too much time to go out. I know so many people who use location spoofers to do it. Can someone tell me how to hatch eggs in Pokemon Go without walking?”

If you are also going through a similar situation with Pokemon Go, then this would be a perfect guide for you. Ideally, to hatch an egg in Pokemon Go, users are supposed to walk a lot. Don’t worry – some smart tricks can help you hatch more eggs without walking. Read on and learn how to hatch eggs without walking in Pokemon Go!

 Click “Try It Free” to Download Dr.Fone and Hatch Eggs in Pokemon Go Without Walking Now!

Way 1: Use an iOS Location Spoofer

An iOS location spoofer is one of the best ways to learn Pokemon Go hatch eggs without walking. If you own an iOS device, then I would recommend using Dr.Fone - Virtual Location (iOS) , which provides excellent location spoofing solutions. With just one click, you can mock your location to anywhere else in the world. Furthermore, you can also simulate your movement between different spots.

• There is a dedicated feature to simulate our walking movement from one spot to another or between multiple spots using it.
• You can enter the number of times you wish to move to and from the specific locations on Dr.Fone – Virtual Location (iOS).
• There is also an option to select your speed – which can make you mock movements like walking, cycling, or driving.
• You can change your locations and movements as many times as you want without the need to jailbreak your device.

To learn how to hatch Pokemon Go eggs without walking using Dr.Fone – Virtual Location (iOS), the following steps can be taken.

Step 1: Connect your device and launch the app

Firstly, just connect your iPhone to the application and launch the Wondershare Dr.Fone > Virtual Location feature.

Just agree to the terms and click on the “Get Started” button to launch the interface of Virtual Location and start Pokemon Go how to hatch eggs at home.

Step 2: Walk between two stops

As the interface would be launched, you can see five different modes in the top-right corner. Just click on the third option (One-stop route) and look for any location from the search bar.

Now you can just select the number of times you wish to move and complete other settings, such as enabling the realistic and fluctuation mode. After that, click on the “Move Here” button.

Tips:
1. Realistic Mode: It enhances the realism of the simulation by fluctuating the speed during the simulation.
2. Fluctuation Mode: This feature enables you to move around within a 5-meter range after reaching your destination, instead of remaining static. This helps to make the GPS location change more realistic, making it less likely for Pokemon Go to detect the use of the virtual location.

This will just start the simulation, and you can even adjust the speed from a slider at the bottom.

Step 3: Move along multiple spots

Using Dr.Fone – Virtual Location (iOS), you can also simulate an entire route between multiple spots as well. To do this, just click on the “Multi-stop route” which is the fourth option in the top-right corner of the interface.

Now, you can mark multiple spots on the map and can also select the number of times you wish to take this route. Click on the “Start Moving” button to start Pokemon Go hatch eggs without walking.

In the end, your location would be changed as the simulation would make Pokemon Go believe that you are taking the subsequent route. You can also change your walking speed from a slider as well.

In this way, you can learn how to hatch eggs in Pokemon Go without walking at the convenience of your home!

Way 2: Use an Android Location Spoofer

This is one of the quickest ways to learn how to hatch Pokemon Go eggs without walking. If you own an Android device, then you can simply use a GPS spoofing app to manually change the location of your device. This will trick Pokemon Go into believing that you are walking instead. For iPhone users, the feature would need a jailbroken device though.

While changing your location, make sure that you do it tactfully. For instance, if an egg would need 10 kilometers of walking, then change your location gradually instead of just switching it in one go. Here’s how to hatch eggs in Pokemon Go without walking by using a GPS spoofer.

1. Firstly, unlock your Poco F5 Pro 5G and go to its Settings > About Phone to tap the Build Number field 7 times. This will unlock the Developer Options settings on your Android.

   

2. Now, go to the Play Store and install a reliable location spoofing app on your phone. Later, visit Settings > Developer Options and turn it on. Also, allow mock locations on the phone and choose the installed app from here.

   

3. That’s it! Now you can just launch the fake GPS app and manually change your location to a few meters away to trick Pokemon Go. Do the same a few times to cover a prominent distance.

   

Just be sure that Pokemon Go won’t detect that you are using a GPS spoofer to hatch eggs. The regular use of an app like this might result in your account ban.

Way 3: Fix Your Poco F5 Pro 5G on a Drone and Play Pokemon Go

Apart from a location spoofing app, there are a handful of other ways to learn how to hatch eggs without walking in Pokemon Go. Most of the eggs in Pokemon Go would need you to walk 2, 5, or 10 kilometers. The good news is that an average drone can easily cover this distance. Firstly, get a working drone on which you can easily place your phone. It is recommended to get a lock so that your device won’t fall while it is on a drone. Once your phone is successfully attached to a drone, just use it to cover a substantial distance. Make sure that the speed is minimal so that Pokemon Go would believe that you are walking instead.

Things to Remember

• While doing so, don’t forget about the safety of your phone as it can get stolen by someone if it goes too far.
• Use a lock and make sure that your phone won’t fall from your drone.
• Enable the Find My Poco F5 Pro 5G service on your Poco F5 Pro 5G or iPhone so that you can locate your phone if it is lost.
• Move your drone slowly so that Pokemon Go would not detect that you are using a drone or playing the game while driving.

Way 4: Exchange the Friend Code of Other Pokemon Go Users

A while back, Pokemon Go enabled the option to add friends on the app and send them gifts. Presently, we can send gifts to 20 other friends from our account in a day. Therefore, if you have a lot of friends, then you can send them eggs, including the exclusive 7 km egg. There are tons of online sources and forums for people to exchange their friend codes for Pokemon Go.

1. Firstly, Launch Pokemon Go on your phone and go to your profile. Adjacent to the “Me” section, tap on the “Friends” section instead.

   

2. Here, you can see a list of your friends and an option to add more friends on Pokemon Go. To add a friend, you need to enter their code which can be obtained from any dedicated forum or even Reddit.

3. That’s it! Once you have added a friend, go to their profile, and choose to trade or send them a gift. For instance, you can send them an exclusive egg and help them hack eggs without walking.

   

Pro-Tip

If you have a friend who goes for a jog or walks a lot, then you can just open Pokemon Go on their phone and let them cover the distance for you as well!

Way 5: Use Your Pokecoins to Purchase More Incubators

You might already know that Pokecoins is the official currency of Pokemon Go. Using it, you can buy all kinds of tools, incense, eggs, incubators, and even Pokemons. Though, if you wish to learn how to hack eggs in Pokemon Go without moving, then consider getting some incubators. There are all kinds of incubators available in the game that can help you hatch eggs without walking much.

1. Firstly, make sure that you have enough Pokecoins with you. If not, launch the app and tap on the Pokeball from its home to visit its shop.

2. From here, you can buy as many Pokecoins as you want. For instance, $0.99 would let you purchase 100 Pokecoins.

   

3. Great! Once you have enough Pokecoins, go to the Shop again and choose to buy eggs and incubators.

4. After getting enough incubators, you can go to your collection and apply more incubators to hatch eggs without walking.

![apply more incubators](https://images.wondershare.com/drfone/article/2019/09/hatch-pokemon-eggs-without-walking-9.jpg)

Way 6: Make Use of Your Bike or Skateboard

This is one of the oldest tricks in the book to learn how to hatch eggs in Pokemon Go without walking. You can just place your phone carefully on your bike or skateboard and cover the needed distance to hatch more eggs. While you would still have to go out for this, the effort needed would be far less than walking.

Just make sure that you stay safe while riding your bike or skateboard. Don’t focus too much on catching new Pokemons. Instead, just cover the needed distance to hatch the egg. Also, ride your bike or skateboard slowly to make sure Pokemon Go won’t detect any fast movement.

Way 7: Use a Roomba while Playing Pokemon Go

If you have a Roomba or any other robotic cleaner in the house, then you can also take its assistance to hack Pokemon Go eggs. All you got to do is place your phone on the Roomba and let it move around in your house. Since the robotic cleaner would move slowly, it will make Pokemon Go believe that you are walking instead. Just be sure that your phone will stay safe and protected. I would recommend placing it in a waterproof lock to further protect it from any wear and tear.

Way 8: Create a Model Railroad to Play Pokemon Go

If you are already into model railroads, then you won’t face any issues playing Pokemon Go. It would be the replica of a big railroad with miniature trains. Simply place your phone on a miniature train and let it revolve around the railroad to cover the distance. Just keep your phone safe and regulate the speed of the train to make sure that Pokemon Go won’t detect any fast movement. You would have to drive your train for a while to cover the distance, but you don’t have to walk to do it.

Way 9: Use A Turntable to Hatch Eggs without Walking Pokemon Go

Do you have a turntable? If yes, you are lucky! You can use it that you used to listen to music to trick Pokemon Go that you’re walking and hatch the eggs. Because the turntable creates enough motion in a wide enough circle that it will trick your phone’s internal sensors into thinking you’re walking. This trick is for anyone who wants to be a quick hatch in Pokemon Go! Here are the steps:

Place your phone on the outermost edge of the turntable > Turn on the turntable > Confirm if your eggs are starting to hatch. If not, readjust your device and try again.

Tips: Tired of walking to hatch eggs? Using Dr.Fone - Virtual Location to hatch Pokémon Go eggs without taking a step. Explore the world of Pokémon from the comfort of your home. Try it now and level up your Pokémon Go adventure!

Bonus Tip: The Different Types of Pokemon Eggs in Pokemon Go

In Pokemon Go, there are several types of Pokemon Eggs that you can collect. These eggs can be obtained by visiting PokeStops or by receiving them as rewards for completing certain in-game tasks. Once an egg is collected, you must walk a certain distance (ranging from 2 to 12 kilometers) to hatch the egg and reveal the Pokemon inside. You can use the ways mentioned above to hatch eggs in Pokemon Go without walking.

The types of eggs that can be collected in Pokemon Go include:

1. 2 km eggs - These eggs typically hatch common Pokemon, such as Pidgey or Caterpie.
2. 5 km eggs - These eggs can hatch a range of Pokemon, including some starters like Charmander and Squirtle, as well as rarer species like Dratini.
3. 7 km eggs - These eggs usually contain baby Pokemon, like Pichu or Togepi, as well as some Alolan forms.
4. 10 km eggs - These eggs are the rarest and can hatch some of the strongest and most sought-after Pokémon, such as Snorlax, Lapras, and even certain legendary Pokemon like Moltres or Zapdos.

Conclusion

Now that you know how to hatch eggs in Pokemon Go without walking in 9 different ways, using a professional location spoofer(like Dr.Fone - Virtual Location ), you can easily be a Poke master for sure. Go ahead and try some of these expert tips and tricks to hatch Pokemon eggs. Just be sure that the app would not detect that you are cheating else it can ban your profile. Also, consider your safety as the first priority and even protect your phone while implementing these tips in a secure way. For more tips and tricks, you can visit the Wondershare Video Community .