How to use Pokemon Go Joystick on Realme Narzo 60x 5G?

Pokemon Go is one of the most popular augmented reality location-based games that let us catch Pokemons and complete tons of other tasks. Needless to say, there are times when players are not able to go outside to catch Pokemons due to all kinds of reasons. The good news is that you can still play your favorite game using a Pokemon Go joystick. To help you, I will let you know how to fake GPS in Pokemon Go using 3 reliable methods in this post.

Part 1: What’s the Need for a Pokemon Go Joystick?

If you are an avid Pokemon Go player, then you might already know that the game demands us to step outside to catch Pokemons or participate in raids. Sadly, not everyone can travel so much on their own. Therefore, you might consider using a Pokemon Go joystick on iOS/Android under the following circumstances.

• In the current Covid-19 pandemic, you might be under a lockdown and can’t step out.
• You could have already explored your nearby areas and would like to catch more Pokemons.
• There could be any other health or environmental condition, stopping you from going out.
• The weather outside might not be suitable or safe to explore the Pokemon Go map on your own.
• Any other possible reason for not being able to travel solely or having enough time to catch Pokemons.

Part 2: Possible Risks for Using a Pokemon Go Joystick

A Pokemon Go spoofing iOS/Android solution can easily change your present location in the game or even simulate your movement. Though, if you use the Pokemon Go joystick app multiple times a day and Niantic detects it, then it can cause some issues.

Please note that the use of any location spoofing or Pokemon Go hack (joystick) is against the terms of Niantic. Therefore, if your account is found using these hacks, then Niantic can display warning messages. If after getting multiple warnings, the hack is still being detected, then it can lead to a temporary or even a permanent ban of your account.

Part 3: How to Fake GPS in Pokemon Go: 3 Foolproof Solutions

Out of all the Pokemon Go joystick and location spoofing solutions, I would recommend trying the following tools.

3.1 Pokemon Go Joystick for iOS (No Jailbreak Needed)

If you are looking for a Pokemon Go spoofing iOS solution, then just give Dr. Fone - Virtual Location (iOS) a try. Without the need for jailbreaking your device, you can spoof your iPhone’s location to anywhere you like. The application can also be used to simulate its movement between multiple spots at a preferred speed.

Besides that, you can also mark any location as favorite or even import/export GPX files using Dr.Fone – Virtual Location. Since the application is extremely easy to use, you don’t have to go through any technical hassle to implement this Pokemon Go joystick iOS solution.

Step 1: Connect your iPhone and launch the application

Firstly, you can just connect your iOS device to the computer and launch Dr.Fone – Virtual Location application. You can agree to its terms of services and click on the “Get Started” button now.

Step 2: Spoof your iPhone Location to Anywhere you want

Once your iPhone is connected, its present location would automatically be displayed on the screen. To spoof the Pokemon Go location on iOS, select the “Teleport Mode” option and enter the target location’s address/name/coordinates on the search bar.

Afterward, you can select the target location and the interface would automatically load it. You can now move the pin around and even zoom in/out the map to get the desired spot. Lastly, click on the “Move Here” button to spoof the fake GPS on Pokemon Go.

Step 3: Simulate the iPhone Movement with a joystick

To use the Pokemon Go joystick iOS solution, you can select the One-stop or Multi-stop mode from the top. Now, you can drop the pins on the map as per your requirements to set up a route to cover.

Afterward, you can enter the number of times you want to cover the route and even set up a preferred speed. Lastly, click on the “March” button to start the simulation on the map. You can also use a joystick at the bottom to move around realistically on Pokemon Go.

Video Guide: Teleport to anywhere in the world!

3.2 Use a Pokemon Go Joystick APK for Android Devices

Just like iPhone, Android device owners can also implement these Pokemon Go hacks for location spoofing. From all the available options, you can consider using GPS Joystick by App Ninjas. As the name suggests, the app will enable a GPS joystick that you can use to simulate the movement of your device. It will let you fake GPS on Pokemon Go by entering the target coordinates or its address.

Step 1: Install the Pokemon Go Spoofer APK

To start with, you can just go to the Play Store page of the GPS Joystick app and install it on your device. Later, you can enable the Developer Options on the phone by going to its Settings > About Phone and tapping the “Build Number” field 7 times.

Afterward, go to its Settings > Developer Options and set the Pokemon Go spoofer APK the default mock location app.

Step 2: Set up the preferences to fake GPS on Pokemon Go

Great! Now all you need to do is launch the GPS Joystick app and go to its Settings to spoof your location. Here, you can enter the exact coordinates of the target location to spoof.

Besides that, you can also tap on the map option to directly enter the address or the name of the target location.

You can further visit the GPS Joystick settings to set up preferred walking, jogging, or running speeds for the simulated movement.

Step 3: Start simulating the movement on your Android

That’s it! Now, you can just view the GPS Joystick on the map with relevant options. You can start/stop the simulation as per your requirements and even directly enter the coordinates to fake GPS on Pokemon Go.

3.3 Pokemon Go Joystick Hack for Rooted Android Phones

Lastly, if you have a rooted Android device, then you can also explore tons of options to fake GPS on Pokemon Go. One of them FGL Pro, which is mostly used by experts for location spoofing and movement simulation. Since the Pokemon Go APK download is available for free, you can use the app without any issue. Here’s how you can use this Pokemon Go APK for rooted devices.

Step 1: Install the Pokemon Go Spoofer APK

At first, make sure that your Realme Narzo 60x 5G is rooted before you install this Pokemon Go APK hack. Later, you can go to its website or any third-party installer to get the location spoofer app.

You can now launch the application and go to its Settings to enable the Root Mode. Also, make it the default mock location app by visiting the Developer Option on your phone.

Step 2: Start Simulating the movement of your Realme Narzo 60x 5G

Great! Now, you can just launch the FGL Pro app on your phone and tap on the search icon to look for the target location. You can now adjust the location on the map and tap on the Start icon. There will be a GPS joystick location on the map that would let you simulate your movement accordingly on the map.

Part 4: Tips to Avoid your Pokemon Go Account from Getting Banned

If you want to avoid getting your account banned and still use a reliable spoofing app for Pokemon Go, then consider the following tips:

• Try not to overly use the Pokemon Go joystick app all the time. It is recommended to use these apps 2-3 times a day only.

• Always consider the cooldown duration in mind before changing your location. For instance, avoid using the app for a while before moving from one place to another. If you move from London to Tokyo to New York the same day, then your account might get flagged.

• Try to spoof your location in the same district or state first and wait for a few hours before changing your whereabouts. The following cooldown duration chart would help you determine this in advance.

  

• Make sure that the Pokemon Go joystick you are using is a reliable solution (like the ones listed above).
• If you have already got a warning on your Pokemon Go account, then consider creating another account for using any fake GPS Pokemon Go hack instead.

There you go! By now, you would be able to implement these spoofing Pokemon Go tips and tricks. As you can see, there can be so many Pokemon Go spoofing iOS/Android solutions that you can explore. While there are plenty of Pokemon Go spoofer APK tools for Android devices, iOS users can try Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking your device, it will let you spoof its location and even simulate its movement to catch Pokemons remotely.

The Ultimate Guide to Get the Rare Candy on Pokemon Go Fire Red On Realme Narzo 60x 5G

In all Pokemon Go versions, a Rare Candy will automatically uplift you to the next level. These cadies are powerful and come with a lot of extra rewards. That said they are also very difficult to find, especially in Pokemon Fire Red. This article will show you some of the ways in which you can find Rare Cady, and level up quickly to improve your status in the game.

Part 1: What is the rare candy in Pokémon Go Fire Red?

All Pokemon Go game variations have Rare Candy, and they are mainly used to upgrade the level of any Pokemon by 1. If you were at level 9, you automatically go up to level 10, etc. This will save you from having to engage in battles to raise your level. You may also earn the level attacks that you would have earned at that level, even without having to fight.

There are a limited number of Rare Candy in Pokemon Go Fire Red. However, you can get unlimited Rare Candies by using Pokemon Go Fire Red Rare Candy cheat codes through GameShark or Action Replay. You may also get them through cloning your existing Rare Cady.

When you use a Rare Candy, you get enough Exp. Points to move to the next level. This means that it is best to use them for getting to the next level, especially when it becomes too challenging. Although you get to the next level, you will not earn any Effort Value Points, which will make your Pokemon weaker than it would have been if you had leveled up through training.

Part 2: How to get rare candy in Pokemon Go Fire Red?

There are three main ways in which you can get Rare Candy in Pokemon Go Fire Red. The first one is using a location spoofer to catch rare candy without moving. The second one involves going to areas where you can find the Rare Cady and the last one involves using a Fire Red Rare Candy Code.

Getting Pokémon GO Fire Red Rare Candy without Walking/Moving

Searching for the simplest way to collect rare candies in Pokémon GO? If your answer is affirmative, there is good news: We have the perfect tool for you. Wondershare Dr.Fone - Virtual Location allows you to play Pokémon GO from the comfort of your house. You no longer need to walk miles to visit gyms and PokéStops or hatch eggs.

All of this can be done without even moving from your bed. Dr.Fone – Virtual Location facilitates you in mimicking realistic movements of the map to play Pokémon GO. To make this process easier for you, there is also a joystick included in the tool to help you simulate movement. Furthermore, it comes with pre-built functions such as a one-stop route and muti-stop route to further help you.

Notable Characteristics of Dr.Fone - Virtual Location

1. Not only can you follow the routes on the map, but you can also import and export route files.
2. There is no need to jailbreak your iOS device to spoof location when using Dr.Fone - Virtual Location.
3. When spoofing your location on iOS devices, Dr.Fone supports up to 5 devices from a single Mac or PC.

Instructions for Getting Pokémon GO Fire Red Rare Candy Without Walking/Moving

Dr.Fone - Virtual Location offers a simple and easy-to-understand way to spoof your location when playing Pokémon GO. The following are the steps you need to follow for location spoofing:

Step 1: Connect to Dr.Fone - Virtual Location and Set Target Location

With Dr.Fone - Virtual Location launched on your computer, connect your smartphone. Once on the map screen, click the “Teleport Mode” icon, the first one, from the toolbar near the top-right corner. Now tap the search bar on the top left corner, enter the targeted location, and press “Enter.”

Step 2: Teleport to Targeted Location

The cursor on the map screen will move to the location you have entered on the map. If you want to move there when spoofing your location, click “Move Here.” It will change the location on the map screen and on your device to the location you entered. You can confirm it by accessing your smartphone and opening a map application.

Step 3: Simulate Movement and Configure Route

To simulate movement when spoofing your location, you can select either “One-Stop Route” or “Multi-Stop Route.” Both are the third and fourth options, respectively, on the toolbar near the top right corner. Now, choose the stop points, type of trip, walking speed, and other parameters. Once you are done, tap “Move Here” or “Start Moving” to initiate the movement.

Getting Pokemon Go Fire Red Rare Candy Normally

You would have to visit certain locations in order to get Pokemon Go Rare Candy in the normal way. The locations which have been found to give most Rare Candy are:

• Take a look behind the house in Cerulean City
• Go to Mount Moon and get one
• Check at the Rocket Game corner
• Take a journey to the Ghost Tower
• When you get to the Safari Zone Warden’s House, check behind the boulder.
• You may also use Meowth or any other Pokemon that has Pickup abilities and try your luck.

Click here

Getting Pokémon Go Fire Red Rare Candy with cheat codes

The best way to go about this is to use a Pokemon Go Fire Red emulator on your computer and then use the fire red chat code shown below and follow the simple instructions.

Look for the Pokemon Go Fire Red codes posted on various user sites.

Use GameShark or My Boy game emulator to install the codes and then get the Rare Candy that you need.

The cheat code for Pokemon Go Fire Red Candy is:

Part 3: How do you get unlimited rare candies in Pokemon Red?

Sometimes, you don’t want to keep adding Pokémon Go Fire Red Rare candy codes one at a time. You simply want to Master Code that will help you get the Rare Candy whenever you need them.

This is how you go about getting unlimited Rare Candy on Pokemon Go Fire Red.

82025840 0044

It can be used to get a single Rare Candy or to unlimited Rare Candy as shown below:

Pokemon Go Cheat Code for Unlimited Rare Candies

82025840 0044

How to use the code:

Step 1 – Turn off or delete any other code that you may have stored.

Step 2 – go to a Pokéstop and then save your game.

Step 3 – create a new cheat as follows;

• Code Name: Rare Candy
• Code Type: CodeBreaker
• Code: 820258400044

Wait for it to be activated and then save it.

Step 4 – Enter the Pokéstop and deactivate the cheat code.

Step 5 – Go to your computer and type in “PC > Item Storage”.

Step 6 – Withdraw a SINGLE Rare Candy

Step 7 – check if you have double Rare Candy entries in your storage. If they are not duplicated, then the cheat has worked as it should. If they are duplicated, then you have to close the game and redo all the steps above.

Step 8 – Now exit and then go back to your Item Storage, where you can withdraw as many Pokemon Go Fire Red Rare Candies as you would want. Simply pick a number between 001 and 999, but never use the down arrow.

In conclusion

Getting Rare Candy in Pokemon Go Fire Red is a difficult task. These cadies are not easy to find and they may not be in a location that you can access easily. The article shows you the locations at which you can collect Pokemon Go Fire Red Candy using the normal gameplay. You may also use Pokemon Go GameShark cheat codes and get unlimited Rare Candy to use whenever you need them.

Why is iPogo not working On Realme Narzo 60x 5G? Fixed

The popular iPogo app is one of the best free apps you can use to spoof on your device while playing Pokémon Go. It is equipped with an abundance of features that allows players to get way ahead in the game by spotting spawns early, catching gym raids, discovering nests and quest events, and so on. If you spot a Pokémon which is way too far from your location, you can use iPogo to fake your virtual coordinates and trick Pokémon Go to think you are nearby that area. Sounds like an amazing app to use right? But, there is a downside to it too as users of the app have repeatedly reported of iPogo not working. The app seems to overload and malfunction after a few hours of repeated usage. This issue is preventing users from harnessing the full potential of their gaming experience.

Why Users download iPogo?

iPogo is a free to use Pokémon Go++ mod which can be downloaded as an APK file for your iOS devices. It features tools that can be used by players to play the game virtually anywhere in the world while also enhancing the gameplay experience. Few of these exclusive features have been mentioned in the list below;

• The Spin and Auto-cash feature can be used to capture Pokémon and throw a spinning ball without requiring a physical device.
• With just one click you can manage your collection of stored items. It removes the cumbersome ordeal of the game to manually select and delete items when you can erase all un-required items with just one tap.
• If you are on the hunt for special shiny Pokémon, you can do so without having to go through dozens of non-shiny one’s. On activating the Auto-Runaway feature on your iPogo, you can skip through the time consuming animations of all non-shiny Pokémon.
• You can augment the game to let your avatar walk continuously at a desired pace. The speed of your avatar’s movement can be adjusted using iPogo.
• If there are unnecessary elements crowding up your screen, you can hide them temporarily.
• You keep track of Pokémon spawns, quests and raids using the feed on your iPogo.

With all these amazing benefits at hand, it seems almost unfair to not be able to make the best of it if iPogo keeps crashing or stops working. Let’s look into the probable reasons why your iPogo is not working and explore methods to solve this dilemma.

Part 1: Common problem that iPogo is not working

Pokémon Go players have made several reports of how iPogo is not functioning normally on their devices. For instance, while using the Plus mod on Pokémon Go, the Realme Narzo 60x 5G device screen goes completely black and unresponsive making the game inaccessible. Also, devices that run Pokémon Go with iPogo seems to be running slower than those which do not use any helper or spoofing support.

Even if your device is able to withstand the load of using iPogo, it may still be possible to face other app related performance issues like ipogo enhanced-throw not working, ipogo joystick not working and ipogo feeds not working either. All these symptoms sums up the fact that the iPogo app is faltering on your device.

Read on to understand the reasons why your device is unable to run the iPogo mod smoothly;

• One of the root causes which explains why iPogo is crashing could be because you are utilizing too much of your phone’s system resource capacity. This means you have too many tabs or other applications opened on your device that is making the resource distribution falter leading to an automatic shutdown.
• Another plausible reason could be that your iPogo application has not been properly installed. It is widely agreed upon that iPogo is a difficult app to install as it involves going through complex steps making it easier for mistakes to be made, eventually leading to a complete breakdown of the software.
• Since installing iPogo is a cumbersome process, players would often resort to using downloading hacks to get the job done faster. However, not all such hacks can be relied upon as they may end up jail breaking your device or make your version of the app even more unstable.

Some Easy Solutions for fixing the “iPogo not working” issue

It is often said that short cuts can cut you short or in this case, hacked! Disrupting the framework of your device is not price you should pay for enjoying the game at its best. Although, there are other safer and more reliable solutions to making the iPogo app run better on your iOS device. Let’s take a brief peak at some of them.

• Limiting the usage of System Resources: Let’s keep in mind that it is unwise to keep too much on your plate and rightfully so. In this case, the more applications you keep active on your shortcut bar, the lesser resources your CPU has left to allocate to the iPogo app. Therefore, close off all other unnecessary applications before launching iPogo as it is already a heavy enough application to run on its own.
• Too many Items opened: Keep a tight check on your list of inventory while playing Pokémon Go using iPogo. Remember to delete all un-required collected items as it may be taking up too much space and wasting precious system resources.
• Keep you Device Clean: Not essentially in the literal sense but yes, it is indeed important to clean up your device often. Use a cleaner app that deletes and clears all those extra cache files that becomes the primary reason of system lag on your iOS device.
• Install the Official Version: It may be tempting for anyone to install the app using shortcut hacks, but that’s all they are – just hacks! Installing iPogo seem like the long way but it is the right way on all accounts. There are three methods you can use to integrate the official iPogo app, all of which has been made more simplified.

Method 1: Use the three-step app installation method which is direct and free to use.

Method 2: If you are opting for a matrix installation, in which case you will need a PC installed with either Windows, LINUX or MacOS.

Method 3: The Signulous method is a premium mod that gives the player access to additional features.

Note: All of these installation methods have specific varied requirements which must be checked appropriately.

Part 2: A better alternative for iPogo - virtual location

If using the iPogo mod to enhance your gaming experience on Pokémon Go seem less appealing with all the added hassle then there is a better alternative for you to use. You can employ a much simpler and easier to install GPS mocking application like Wondershare’s Dr.Fone Virtual Location . It offers amazing user-friendly features like speed modulation, joystick control and map routing with none of the drawbacks that you had to previously overcome. It is a highly efficient virtual location tool that can be used to conveniently spoof your location without running the risk of detection on a GPS based game like Pokémon Go.

Primary Features of Dr. Fone

• Adjust the speed of travel with three speed modes, like walking, cycling or even driving.
• Manually move your GPS on the map freely using a virtual joystick in a 360 degree direction.
• Simulate your avatar’s movements to travel on a determined route of your choice.

Step by Step Tutorial

You can follow these easy steps to teleport to anywhere in the world with the help of drfone Virtual Location.

Step 1: Run the Program

Begin with downloading Dr.Fone – Virtual Location (iOS) on your PC. Then, install and launch it. To proceed, make sure to choose “Virtual Location” tab given on the main screen.

Step 2: Plug iPhone

Now, grab your iPhone and get it connected with the PC using the lightening cable. Once done, hit on “Get Started” to begin spoofing.

Step 3: Check Location

You will notice a map on the screen now. As it comes, you got to click on ‘Centre On’ to accurately pin point the GPS to your location.

Step 4: Enable Teleport Mode

Now, you are required to turn on the ‘teleport mode’. To do this, simply click on the first icon on the upper right hand corner. After that, enter the location you want on the upper right field and then hit ‘Go’.

Step 5: Start Teleporting

Once you enter the location, a pop-up will appear. Here, you can see the distance of the location you have chosen. Click on ‘Move here’ in the pop up box and you are good to go.

Now, the location is changed. You can now open any location based app on your iPhone and check the location. It will show the location you have selected.

Conclusion

Pokémon Go Plus mods like iPogo involves a certain degree of care in order to have a healthy game experience. Be sure to take pre-emptive measures suggested in this article and you would notice your device running smoothly in no time.

Also read: